2016/02/23 EdgeMAX シリーズのファームウェア v1.8.0 がリリースされました。
詳細はこちら をご覧下さい。

コマンド ＞ show (operational)

提供：EdgeOS 日本語Wiki [非公式]
2015年10月11日 (日) 10:36時点におけるHiro (トーク | 投稿記録)による版 (→‎show firewall)
ナビゲーションに移動 検索に移動

このページの概要

当ページでは、Operational モード show コマンドの使い方をご紹介します。

コマンドの実行例は、ページ下部の関連項目からアクセスして下さい。

show コマンドの使い方

index

show arp

  • show arp
    Show Address Resolution Protocol (ARP) information
    • show arp <ENTER>
      Show Address Resolution Protocol (ARP) information
    • show arp {interface} <ENTER>
      Show Address Resolution Protocol (ARP) for a specific interface


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show arp

show bridge

  • show bridge
    • show bridge <ENTER>
      Show bridging information
    • show bridge {★BRIDGE★}
      • show bridge {★BRIDGE★} <ENTER>
        ★★★
      • show bridge {★BRIDGE★} macs <ENTER>
        Show bridge Media Access Control (MAC) address table
      • show bridge {★BRIDGE★} spanning-tree <ENTER>
        Show bridge spanning tree information


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show bridge

show configuration

  • show configuration
    • show configuration <ENTER>
      Show running configuration
    • show configuration all <ENTER>
      Show running configuration (including default values)
    • show configuration commands <ENTER>
      Show running configuration as set commands


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show configuration

show conntrack

  • show conntrack
    Show conntrack entries in the conntrack table
    • show conntrack ignore <ENTER>
      Show Conntrack ignore rules and counters
    • show conntrack table
      Show conntrack entries for table


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show conntrack

show date

  • show date
    • show date <ENTER>
      Show system date and time
      • show date utc <ENTER>
        Show system date and time as Coordinated Universal Time


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show date

show debugging

  • show debugging
    Show route protocol debugging flags
    • show debugging bgp <ENTER>
      Show Border Gateway Protocol (BGP) debugging flags
    • show debugging ospf <ENTER>
      Show Open Shortest Path First (OSPF) protocol debugging flags
    • show debugging ospfv3 <ENTER>
      Show IPv6 Open Shortest Path First (OSPFv3) protocol debugging flags
    • show debugging rip <ENTER>
      Show Routing Information Protocol (RIP) debugging flags
    • show debugging ripng <ENTER>
      Show RIPNG protocol debugging flags
    • show debugging zebra <ENTER>
      Show zebra debugging flags


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show debugging

show dhcp

  • show dhcp
    Show Dynamic Host Configuration Protocol (DHCP) information
    • show dhcp client leases
      • show dhcp client leases <ENTER>
        Show DHCP client leases
      • show dhcp client leases interface {interface} <ENTER>
        Show DHCP client information for interface
    • show dhcp leases
      • show dhcp leases <ENTER>
        Show current DHCP leases
      • show dhcp leases expired <ENTER>
        Show expired DHCP leases
      • show dhcp leases pool {DHCP-name}
        • show dhcp leases pool {DHCP-name} <ENTER>
          Show current DHCP leases for a specific pool
        • show dhcp leases pool {DHCP-name} expired <ENTER>
          Show expired DHCP leases for a specific pool
    • show dhcp statistics
      • show dhcp statistics <ENTER>
        Show current DHCP statistics
      • show dhcp statistics pool {DHCP-name} <ENTER>
        Show current DHCP statistics for a specific pool


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dhcp


解説

show dhcp client leases のみ、DHCP クライアント としての EdgeOS の情報、それ以外は DHCP サーバー としての EdgeOS の情報になります。


show dhcp client leases により、CATV 等の回線で、WAN側 DHCP で割り当てられた DNS の情報を確認することができます。詳細は、コマンド実行例 をご覧下さい。

show dhcpv6

  • show dhcpv6
    Show status related to DHCPv6
    • show dhcpv6 client leases <ENTER>
      Display DHCPv6 client leases
    • show dhcpv6 relay-agent status <ENTER>
      Show status of DHCPv6 Relay Agent
    • show dhcpv6 server
      Show DHCPv6 server information
      • show dhcpv6 server leases <ENTER>
        Show DHCPv6 Server Leases
      • show dhcpv6 server status <ENTER>
        Show DHCPv6 Server Status


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dhcpv6

show dhcpv6-pd

  • show dhcpv6-pd
    Show status related to DHCPv6 Prefix Delegation
    • show dhcpv6-pd duid <ENTER>
      Show DHCPv6-PD DUID
    • show dhcpv6-pd log <ENTER>
      Show DHCPv6-PD log file


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dhcpv6-pd

show disk

  • show disk {disk} format <ENTER>
    Show disk drive formatting


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show disk

show dns

  • show dns
    Show Domain Name Server (DNS) information
    • show dns dynamic status <ENTER>
      Show Dynamic DNS status
    • show dns forwarding
      Show DNS forwarding information
      • show dns forwarding nameservers <ENTER>
        Show DNS forwarding nameservers information
      • show dns forwarding statistics <ENTER>
        Show DNS forwarding statistics


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dns

show firewall

  • show firewall
    • show firewall <ENTER>
      Show firewall information
    • show firewall group
      • show firewall group <ENTER>
        Show firewall/nat groups
      • show firewall group {firewall group name} <ENTER>
        Show firewall/nat group
    • show firewall ipv6-modify
      • show firewall ipv6-modify <ENTER>
        Show IPv6 firewall modify chains
      • show firewall ipv6-modify statistics <ENTER>
        Show firewall counter information
      • show firewall ipv6-modify {★firewall ipv6-modify★}
        • show firewall ipv6-modify {★firewall ipv6-modify★} <ENTER>
          ★★★
        • show firewall ipv6-modify {★firewall ipv6-modify★} rule {★firewall ipv6-modify rule★} <ENTER>
          Show summary of IPv6 firewall modify rules
        • show firewall ipv6-modify {★firewall ipv6-modify★} statistics <ENTER>
          Show IPv6 firewall modify counter information
    • show firewall ipv6-name
    • show firewall modify
      • show firewall modify <ENTER>
        Show IPv4 firewall modify chains
      • show firewall modify statistics <ENTER>
        Show firewall counter information
      • show firewall modify {★firewall modify★}
        • show firewall modify {★firewall modify★} <ENTER>
          ★★★
        • show firewall modify {★firewall modify★} rule {★firewall modify rule★} <ENTER>
          Show summary of IPv4 firewall modify rules
        • show firewall modify {★firewall modify★} statistics <ENTER>
          Show IPv4 firewall modify counter information
    • show firewall name
    • show firewall statistics <ENTER>
      Show firewall counter information


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show firewall

show flow-accounting

  • show flow-accounting
  • show flow-accounting
    • show flow-accounting <ENTER>
      Show flow accounting statistics
    • show flow-accounting egress
      • show flow-accounting egress <ENTER>
        Show flow accounting statistics
      • show flow-accounting egress interface {interface}
        • show flow-accounting egress interface {interface} <ENTER>
          Show flow accounting statistics for specified interface
        • show flow-accounting egress interface {interface} host {x.x.x.x} <ENTER>
          Show flow accounting statistics for specified interface/host
        • show flow-accounting egress interface {interface} port {0-65536} <ENTER>
          Show flow accounting statistics for specified interface/port
        • show flow-accounting egress interface {interface} top {0-N} <ENTER>
          Show flow accounting statistics for top N
    • show flow-accounting interface {interface}
      • show flow-accounting interface {interface} <ENTER>
        Show flow accounting statistics for specified interface
      • show flow-accounting interface {interface} host {x.x.x.x} <ENTER>
        Show flow accounting statistics for specified interface/host
      • show flow-accounting interface {interface} port {0-65536} <ENTER>
        Show flow accounting statistics for specified interface/port
      • show flow-accounting interface {interface} top {0-N} <ENTER>
        Show flow accounting statistics for top N


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show flow-accounting

show hardware

  • show hardware
    Show system hardware details
    • show hardware cpu
      • show hardware cpu <ENTER>
        Show CPU info
      • show hardware cpu detail <ENTER>
        Show system CPU details
      • show hardware cpu summary <ENTER>
        Show CPU's on system
    • show hardware mem <ENTER>
      Show system RAM details
    • show hardware temperature <ENTER>
      Show hardware temperature


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show hardware

show history

  • show history
    show command history


show host

  • show host
    Show host information


show incoming

  • show incoming
    Show ethernet input-policy information


show interfaces

  • show interfaces
    Show network interface information


show ip

  • show ip
    Show IPv4 routing information


show ipv6

  • show ipv6
    Show IPv6 routing information


show lldp

  • show lldp
    Show lldp


show load-balance

  • show load-balance
    Show load-balance


show log

  • show log
    Show contents of current master log file


show login

  • show login
    Show current login credentials


show nat

  • show nat
    Show Network Address Translation (NAT) information
    • show nat rules <ENTER>
      Show configured NAT rule set
    • show nat statistics <ENTER>
      Show statistics for configured NAT rules
    • show nat translations
      • show nat translations <ENTER>
        Show active NAT translations
      • show nat translations destination
        • show nat translations destination <ENTER>
          Show active NAT destination translations
        • show nat translations destination address {x.x.x.x} <ENTER>
          Show active NAT destination translations for an IP address
        • show nat translations destination detail <ENTER>
          Show active NAT destination translations detail
        • show nat translations destination monitor
          • show nat translations destination monitor <ENTER>
            Show active NAT destination translations events
          • show nat translations destination monitor detail <ENTER>
            Show active NAT destination translations events detail
      • show nat translations detail <ENTER>
        Show active NAT translations detail
      • show nat translations monitor
        • show nat translations monitor <ENTER>
          Show active NAT translations events
        • show nat translations monitor detail <ENTER>
          Show active NAT translations events verbose
      • show nat translations source
        • show nat translations source <ENTER>
          Show active NAT source translations
        • show nat translations source address {x.x.x.x} <ENTER>
          Show active NAT source translations for an IP address
        • show nat translations source detail <ENTER>
          Show active NAT source translations detail
        • show nat translations source monitor
          • show nat translations source monitor <ENTER>
            Show active NAT source translations events
          • show nat translations source monitor detail <ENTER>
            Show active NAT source translations events


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show nat

show ntp

  • show ntp
    • show ntp <ENTER>
      Show peer status of network time daemon
    • show ntp {ntp server hostname|ntp server IP address} <ENTER>
      Show date and time of specified NTP server


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show ntp

show openvpn

  • show openvpn status
    Show OpenVPN information
    • show openvpn status client <ENTER>
      Show tunnel status for OpenVPN client
    • show openvpn status server <ENTER>
      Show tunnel status for OpenVPN server
    • show openvpn status site-to-site <ENTER>
      Show tunnel status for OpenVPN site-to-site


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show openvpn

show pppoe-server

  • show pppoe-server <ENTER>
    Show active PPPoE server sessions


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show pppoe-server

show queueing

  • show queueing
    • show queueing <ENTER>
      Show ethernet queueing information
    • show queueing adsl
      • show queueing adsl <ENTER>
        Show adsl queueing information
      • show queueing adsl {★adsl★} <ENTER>
        ★★★
    • show queueing bonding
      • show queueing bonding <ENTER>
        Show bonding queueing information
      • show queueing bonding {★bonding★}
        • show queueing bonding {★bonding★} <ENTER>
          ★★★
        • show queueing bonding {★bonding★} vif
          • show queueing bonding {★bonding★} vif <ENTER>
            Show specified virtual network interface (vif) information
          • show queueing bonding {★bonding★} vif {★vif★} <ENTER>
            ★★★
    • show queueing ethernet
    • show queueing input
      • show queueing input <ENTER>
        Show input queueing information
      • show queueing input {★input★} <ENTER>
        ★★★
    • show queueing pppoe
      • show queueing pppoe <ENTER>
        Show pppoe interface queueing information
      • show queueing pppoe {★pppoe★}
        • show queueing pppoe {★pppoe★} <ENTER>
          ★★★
        • show queueing pppoe {★pppoe★} vif
          • show queueing pppoe {★pppoe★} vif <ENTER>
            Show specified virtual network interface (vif) information
          • show queueing pppoe {★pppoe★} vif {★vif★} <ENTER>
            ★★★
    • show queueing pseudo-ethernet <ENTER>
      Show tunnel queueing information
    • show queueing serial
      • show queueing serial <ENTER>
        Show serial queueing information
      • show queueing serial {★serial★} <ENTER>
        ★★★
    • show queueing tunnel <ENTER>
      Show tunnel queueing information
    • show queueing vti <ENTER>
      Show vti queueing information
    • show queueing wireless
      • show queueing wireless <ENTER>
        Show wireless queueing information
      • show queueing wireless {★wireless★}
        • show queueing wireless {★wireless★} <ENTER>
          ★★★
        • show queueing wireless {★wireless★} vif
          • show queueing wireless {★wireless★} vif <ENTER>
            Show specified virtual network interface (vif) information
          • show queueing wireless {★wireless★} vif {★vif★} <ENTER>
            ★★★


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show queueing

show reboot

  • show reboot <ENTER>
    Show scheduled reboot


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show reboot

show route-map

  • show route-map
    • show route-map <ENTER>
      Show route-map information
    • show route-map {WORD} <ENTER>
      Show specified route-map information


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show route-map

show shutdown

  • show shutdown <ENTER>
    Show scheduled shutdown


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show shutdown

show snmp

  • show snmp
    • show snmp <ENTER>
      Show status of SNMP on localhost
    • show snmp community {SNMP Community}
    • show snmp mib ifmib
      • show snmp mib ifmib <ENTER>
        Show SNMP interfaces MIB information
      • show snmp mib ifmib ifAlias
        • show snmp mib ifmib ifAlias <ENTER>
          Show SNMP ifAlias for all interfaces
        • show snmp mib ifmib ifAlias {interface} <ENTER>
          (Show SNMP ifAlias for specified interfaces)
      • show snmp mib ifmib ifDescr
        • show snmp mib ifmib ifDescr <ENTER>
          Show SNMP ifDescr for all interfaces
        • show snmp mib ifmib ifDescr {interface} <ENTER>
          (Show SNMP ifDescr for specified interfaces)
      • show snmp mib ifmib ifIndex
        • show snmp mib ifmib ifIndex <ENTER>
          Show SNMP ifIndex for all interfaces
        • show snmp mib ifmib ifIndex {interface} <ENTER>
          (Show SNMP ifIndex for specified interfaces)
    • show snmp v3
      • show snmp v3 <ENTER>
        Show status of SNMP v3 on localhost
      • show snmp v3 certificates <ENTER>
        Show TSM certificates
      • show snmp v3 group <ENTER>
        Show the list of configured groups
      • show snmp v3 trap-target <ENTER>
        Show the list of configured targets
      • show snmp v3 user <ENTER>
        Show the list of configured users
      • show snmp v3 view <ENTER>
        Show the list of configured views


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show snmp

show system

  • show system
    Show system information
    • show system boot-messages
      • show system boot-messages <ENTER>
        Show most recent kernel boot messages
      • show system boot-messages all <ENTER>
        Show all kernel boot messages
    • show system commit
      • show system commit <ENTER>
        Show commit revisions log
      • show system commit diff {diff} <ENTER>
        show commit revision diff
      • show system commit file {file}
        • show system commit file {file} <ENTER>
          show commit revision file
        • show system commit file {file} compare
          • show system commit file {file} compare <ENTER>
            compare config file revisions
          • show system commit file {file} compare commands <ENTER>
            compare config file revisions
    • show system connections
      • show system connections <ENTER>
        Show active network connections on the system
      • show system connections tcp
        • show system connections tcp <ENTER>
          show TCP connection information
        • show system connections tcp all <ENTER>
          show all TCP connections
        • show system connections tcp numeric <ENTER>
          show TCP connection without resolving names
      • show system connections udp
        • show system connections udp <ENTER>
          show UDP socket information
        • show system connections udp numeric <ENTER>
          show UDP socket information without resolving names
    • show system image
      • show system image <ENTER>
        Show installed Vyatta images
      • show system image storage <ENTER>
        Show disk space utilization of system images
    • show system kernel-messages <ENTER>
      Show messages in kernel ring buffer
    • show system login users
      Show user accounts
      • show system login users <ENTER>
        Show user account information
      • show system login users all <ENTER>
        Show information about all accounts
      • show system login users locked <ENTER>
        Show information about locked accounts
      • show system login users other <ENTER>
        Show information about non-Vyatta accounts
      • show system login users vyatta <ENTER>
        Show information about vyatta accounts
    • show system memory
      • show system memory <ENTER>
        Display system memory usage
      • show system memory cache <ENTER>
        Show kernel cache information
      • show system memory detail <ENTER>
        Report detailed system memory usage
      • show system memory quagga <ENTER>
        Show Quagga memory usage
    • show system processes
      • show system processes <ENTER>
        Show system processes
      • show system processes extensive <ENTER>
        Show extensive process info
      • show system processes summary <ENTER>
        Show summary of system processes
      • show system processes tree <ENTER>
        Show process tree
    • show system routing-daemons <ENTER>
      Show Quagga routing daemons
    • show system storage <ENTER>
      Show filesystem usage
    • show system uptime <ENTER>
      Show how long the system has been up


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show system

show table

  • show table <ENTER>
    Show routing table


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show table

show tech-support

  • show tech-support
    Show consolidated tech-support report
    • show tech-support <ENTER>
      Show consolidated tech-support report
    • show tech-support brief
      • show tech-support brief <ENTER>
        Show brief tech-support report
      • show tech-support brief save
        • show tech-support brief save <ENTER>
          Save brief tech-support report
        • show tech-support brief save {URL} <ENTER>
          Save compressed brief tech-support report to specified path/file
      • show tech-support brief save-uncompressed
        • show tech-support brief save-uncompressed <ENTER>
          Save uncompressed brief tech-support report
        • show tech-support brief save-uncompressed {URL} <ENTER>
          Save uncompressed brief tech-support report to specified path/file
    • show tech-support save
      • show tech-support save <ENTER>
        Save consolidated tech-support report
      • show tech-support save {URL} <ENTER>
        Save compressed tech-support report to the specified path/file
    • show tech-support save-uncompressed
      • show tech-support save-uncompressed <ENTER>
        Save consolidated tech-support report uncompressed
      • show tech-support save-uncompressed {URL} <ENTER>
        Save uncompressed tech-support report to specified path/file


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show tech-support

show ubnt

  • show ubnt
    Show UBNT information
    • show ubnt discover
      • show ubnt discover <ENTER>
        Show UBNT discovered devices
      • show ubnt discover detail <ENTER>
        Show UBNT discovered devices detail
    • show ubnt offload <ENTER>
      Show UBNT offload status

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show ubnt

show update

  • show update
    Run an update command
    • show update webproxy blacklists
      • show update webproxy blacklists <ENTER>
        Update the webproxy blacklist database
      • show update webproxy blacklists category {webproxy blacklist category} <ENTER>
        Update a category of the webproxy blacklist database


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show update

show upnp2

  • show upnp2 rules <ENTER>
    UPnP firewall rules and NAT port forwards


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show upnp2

show users

  • show users <ENTER>
    Show user information
    ログイン中のユーザーの情報を表示


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show users


解説

  • ログイン中のユーザーについては、show login user よりも詳細な情報が表示されます。
  • ログインしていないユーザーの情報を表示する場合は、show system login users を用います。

show version

  • show version
    • show version <ENTER>
      Show Vyatta version information
    • show version added <ENTER>
      Show Vyatta version information plus added packages
    • show version all <ENTER>
      Show Vyatta version information plus all packages changes
    • show version deleted <ENTER>
      Show Vyatta version information plus deleted packages
    • show version downgraded <ENTER>
      Show Vyatta version information plus downgraded packages
    • show version quagga <ENTER>
      Show Quagga version information
    • show version upgraded <ENTER>
      Show Vyatta version information plus upgraded packages


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show version

show vpn

  • show vpn
    Show Virtual Private Network (VPN) information
    • show vpn debug
      • show vpn debug <ENTER>
        Show VPN debugging information
      • show vpn debug detail <ENTER>
        Show detailed VPN debugging information
      • show vpn debug peer {PEER}
        • show vpn debug peer {PEER} <ENTER>
          Show debugging information for a peer
        • show vpn debug peer {PEER} tunnel {TUNNEL} <ENTER>
          Show debugging information for a peer's tunnel
    • show vpn ike
      Show Internet Key Exchange (IKE) information
      • show vpn ike rsa-keys <ENTER>
        Show VPN RSA keys
      • show vpn ike sa
        • show vpn ike sa <ENTER>
          Show all currently active IKE Security Associations (SA)
        • show vpn ike sa nat-traversal <ENTER>
          Show all currently active IKE Security Associations (SA) that are using NAT Traversal
        • show vpn ike sa peer {PEER} <ENTER>
          Show all currently active IKE Security Associations (SA) for a peer
      • show vpn ike secrets <ENTER>
        Show all the pre-shared key secrets
      • show vpn ike status <ENTER>
        Show summary of IKE process information
    • show vpn ipsec
      • show vpn ipsec policy <ENTER>
        Show the in-kernel crypto policies
      • show vpn ipsec sa
        • show vpn ipsec sa <ENTER>
          Show all active IPsec Security Associations (SA)
        • show vpn ipsec sa detail
          • show vpn ipsec sa detail <ENTER>
            Show details for all active IPsec Security Associations (SA)
          • show vpn ipsec sa detail peer {PEER}
            • show vpn ipsec sa detail peer {PEER} <ENTER>
              Show all active IPsec Security Associations (SA) for a peer
            • show vpn ipsec sa detail peer {PEER} tunnel {TUNNEL} <ENTER>
              Show the active IPsec Security Association (SA) for a peer's tunnel
        • show vpn ipsec sa nat-traversal <ENTER>
          Show all active IPsec Security Associations (SA) that are using NAT Traversal
        • show vpn ipsec sa peer {PEER}
          • show vpn ipsec sa peer {PEER} <ENTER>
            Show all active IPsec Security Associations (SA) for a peer
          • show vpn ipsec sa peer {PEER} tunnel {TUNNEL} <ENTER>
            Show the active IPsec Security Association (SA) for a peer's tunnel
        • show vpn ipsec sa statistics
          • show vpn ipsec sa statistics <ENTER>
            Show statistics of all active tunnels that have IPsec Security Associations (SA)
          • show vpn ipsec sa statistics peer {PEER}
            • show vpn ipsec sa statistics peer {PEER} <ENTER>
              Show stats for all active IPsec Security Associations (SA) for a peer
            • show vpn ipsec sa statistics peer {PEER} tunnel {TUNNEL} <ENTER>
              Show stats for the active IPsec Security Association (SA) for a peer's tunnel
      • show vpn ipsec state <ENTER>
        Show the in-kernel crypto state
      • show vpn ipsec status <ENTER>
        Show status of IPsec process
    • show vpn remote-access <ENTER>
      Show active remote access Virtual Private Network (VPN) sessions


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show vpn

show vrrp

  • show vrrp
    • show vrrp <ENTER>
      Show Virtual Router Redundancy Protocol (VRRP) information
      • show vrrp interface {interface}
        • show vrrp interface {interface} <ENTER>
          Show VRRP information for specified interface
        • show vrrp interface {interface} group {GROUP} <ENTER>
          Show VRRP information for specified interface and group
      • show vrrp summary <ENTER>
        Show summary of VRRP information


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show vrrp

show webproxy

  • show webproxy
    Show webproxy information
    • show webproxy blacklist
      • show webproxy blacklist categories <ENTER>
        Show webproxy blacklist categories
      • show webproxy blacklist domains
        • show webproxy blacklist domains <ENTER>
          Show webproxy blacklist domains
        • show webproxy blacklist domains {★DOMAINS★} <ENTER>
          ★★★
      • show webproxy blacklist log
        • show webproxy blacklist log <ENTER>
          Show contents of webproxy blacklist log
        • show webproxy blacklist log summary <ENTER>
          Show summary of webproxy blacklist log
      • show webproxy blacklist search {★SEARCH★} <ENTER>
        Show webproxy blacklist search
      • show webproxy blacklist urls <ENTER>
        Show webproxy blacklist urls
    • show webproxy log <ENTER>
      Show contents of webproxy access log
    • show webproxy update-log <ENTER>
      Show update log for url-filter database


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show webproxy

show zebra

  • show zebra <ENTER>
    Show information for zebra route daemon


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show zebra

関連項目

「http://edge-os.net/w/index.php?title=コマンド_＞_show_(operational)&oldid=312」から取得