コマンド＞ show (operational)

このページの概要

当ページでは、Operational モード show コマンドの使い方をご紹介します。

コマンドの実行例は、ページ下部の関連項目からアクセスして下さい。

show コマンドの使い方

index

show
- show arp
  Show Address Resolution Protocol (ARP) information
- show bridge
  Show bridging information
- show configuration
  Show running configuration
- show conntrack
  Show conntrack entries in the conntrack table
- show date
  Show system date and time
- show debugging
  Show route protocol debugging flags
- show dhcp
  Show Dynamic Host Configuration Protocol (DHCP) information
- show dhcpv6
  Show status related to DHCPv6
- show dhcpv6-pd
  Show status related to DHCPv6 Prefix Delegation
- show disk
  Show status of disk device
- show dns
  Show Domain Name Server (DNS) information
- show firewall
  Show firewall information
- show flow-accounting
  Show flow accounting statistics
- show hardware
  Show system hardware details
- show history
  show command history
- show host
  Show host information
- show incoming
  Show ethernet input-policy information
- show interfaces
  Show network interface information
- show ip
  Show IPv4 routing information
- show ipv6
  Show IPv6 routing information
- show lldp
  Show lldp
- show load-balance
  Show load-balance
- show log
  Show contents of current master log file
- show login
  Show current login credentials
- show nat
  Show Network Address Translation (NAT) information
- show ntp
  Show peer status of network time daemon
- show openvpn
  Show OpenVPN information
- show pppoe-server
  Show active PPPoE server sessions
- show queueing
  Show ethernet queueing information
- show reboot
  Show scheduled reboot
- show route-map
  Show route-map information
- show shutdown
  Show scheduled shutdown
- show snmp
  Show status of SNMP on localhost
- show system
  Show system information
- show table
  Show routing table
- show tech-support
  Show consolidated tech-support report
- show ubnt
  Show UBNT information
- show update
  Run an update command
- show upnp2
  show UPnp
- show users
  Show user information
- show version
  Show Vyatta version information
- show vpn
  Show Virtual Private Network (VPN) information
- show vrrp
  Show Virtual Router Redundancy Protocol (VRRP) information
- show webproxy
  Show webproxy information
- show zebra
  Show information for zebra route daemon

show arp

show arp
Show Address Resolution Protocol (ARP) information
- show arp <ENTER>
  Show Address Resolution Protocol (ARP) information
- show arp {interface} <ENTER>
  Show Address Resolution Protocol (ARP) for a specific interface

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show arp

show bridge

show bridge
- show bridge <ENTER>
  Show bridging information
- show bridge {★BRIDGE★}
  - show bridge {★BRIDGE★} <ENTER>
    ★★★
  - show bridge {★BRIDGE★} macs <ENTER>
    Show bridge Media Access Control (MAC) address table
  - show bridge {★BRIDGE★} spanning-tree <ENTER>
    Show bridge spanning tree information

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show bridge

show configuration

show configuration
- show configuration <ENTER>
  Show running configuration
- show configuration all <ENTER>
  Show running configuration (including default values)
- show configuration commands <ENTER>
  Show running configuration as set commands

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show configuration

show conntrack

show conntrack
Show conntrack entries in the conntrack table
- show conntrack ignore <ENTER>
  Show Conntrack ignore rules and counters
- show conntrack table
  Show conntrack entries for table
  - show conntrack table ipv4
    - show conntrack table ipv4 <ENTER>
      Show Conntrack entries for IPv4 protocol
    - show conntrack table ipv4 source {IPv4-address(:port)}
      - show conntrack table ipv4 source {IPv4-address(:port)} <ENTER>
        Show Conntrack entries for the source IP
      - show conntrack table ipv4 source {IPv4-address(:port)} destination {IPv4-address(:port)} <ENTER>
        Show Conntrack entries for the destination IP
  - show conntrack table ipv6
    - show conntrack table ipv6 <ENTER>
      Show Conntrack entries for IPv6 protocol
    - show conntrack table ipv6 source {IPv6-address(:port)}
      - show conntrack table ipv6 source {IPv6-address(:port)} <ENTER>
        Show Conntrack entries for the source IP
      - show conntrack table ipv6 source {IPv6-address(:port)} destination {IPv6-address(:port)} <ENTER>
        Show Conntrack entries for the destination IP

show date

show date
- show date <ENTER>
  Show system date and time
  - show date utc <ENTER>
    Show system date and time as Coordinated Universal Time

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show date

show debugging

show debugging
Show route protocol debugging flags
- show debugging bgp <ENTER>
  Show Border Gateway Protocol (BGP) debugging flags
- show debugging ospf <ENTER>
  Show Open Shortest Path First (OSPF) protocol debugging flags
- show debugging ospfv3 <ENTER>
  Show IPv6 Open Shortest Path First (OSPFv3) protocol debugging flags
- show debugging rip <ENTER>
  Show Routing Information Protocol (RIP) debugging flags
- show debugging ripng <ENTER>
  Show RIPNG protocol debugging flags
- show debugging zebra <ENTER>
  Show zebra debugging flags

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show debugging

show dhcp

show dhcp
Show Dynamic Host Configuration Protocol (DHCP) information
- show dhcp client leases
  - show dhcp client leases <ENTER>
    Show DHCP client leases
  - show dhcp client leases interface {interface} <ENTER>
    Show DHCP client information for interface
- show dhcp leases
  - show dhcp leases <ENTER>
    Show current DHCP leases
  - show dhcp leases expired <ENTER>
    Show expired DHCP leases
  - show dhcp leases pool {DHCP-name}
    - show dhcp leases pool {DHCP-name} <ENTER>
      Show current DHCP leases for a specific pool
    - show dhcp leases pool {DHCP-name} expired <ENTER>
      Show expired DHCP leases for a specific pool
- show dhcp statistics
  - show dhcp statistics <ENTER>
    Show current DHCP statistics
  - show dhcp statistics pool {DHCP-name} <ENTER>
    Show current DHCP statistics for a specific pool

show dhcpv6

show dhcpv6
Show status related to DHCPv6
- show dhcpv6 client leases <ENTER>
  Display DHCPv6 client leases
- show dhcpv6 relay-agent status <ENTER>
  Show status of DHCPv6 Relay Agent
- show dhcpv6 server
  Show DHCPv6 server information
  - show dhcpv6 server leases <ENTER>
    Show DHCPv6 Server Leases
  - show dhcpv6 server status <ENTER>
    Show DHCPv6 Server Status

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show dhcpv6

show dhcpv6-pd

show dhcpv6-pd
Show status related to DHCPv6 Prefix Delegation
- show dhcpv6-pd duid <ENTER>
  Show DHCPv6-PD DUID
- show dhcpv6-pd log <ENTER>
  Show DHCPv6-PD log file

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show dhcpv6-pd

show disk

show disk {disk} format <ENTER>
Show disk drive formatting

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show disk

show dns

show dns
Show Domain Name Server (DNS) information
- show dns dynamic status <ENTER>
  Show Dynamic DNS status
- show dns forwarding
  Show DNS forwarding information
  - show dns forwarding nameservers <ENTER>
    Show DNS forwarding nameservers information
  - show dns forwarding statistics <ENTER>
    Show DNS forwarding statistics

show firewall

show firewall
Show firewall information

show flow-accounting

show flow-accounting
Show flow accounting statistics

show hardware

show hardware
Show system hardware details
- show hardware cpu
  - show hardware cpu <ENTER>
    Show CPU info
  - show hardware cpu detail <ENTER>
    Show system CPU details
  - show hardware cpu summary <ENTER>
    Show CPU's on system
- show hardware mem <ENTER>
  Show system RAM details
- show hardware temperature <ENTER>
  Show hardware temperature

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show hardware

show history

show history
show command history

show host

show host
Show host information

show incoming

show incoming
Show ethernet input-policy information

show interfaces

show interfaces
Show network interface information

show ip

show ip
Show IPv4 routing information

show ipv6

show ipv6
Show IPv6 routing information

show lldp

show lldp
Show lldp

show load-balance

show load-balance
Show load-balance

show log

show log
Show contents of current master log file

show login

show login
Show current login credentials

show nat

show nat
Show Network Address Translation (NAT) information

show ntp

show ntp
- show ntp <ENTER>
  Show peer status of network time daemon
- show ntp {ntp server hostname|ntp server IP address} <ENTER>
  Show date and time of specified NTP server

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show ntp

show openvpn

show openvpn status
Show OpenVPN information
- show openvpn status client <ENTER>
  Show tunnel status for OpenVPN client
- show openvpn status server <ENTER>
  Show tunnel status for OpenVPN server
- show openvpn status site-to-site <ENTER>
  Show tunnel status for OpenVPN site-to-site

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show openvpn

show pppoe-server

show pppoe-server <ENTER>
Show active PPPoE server sessions

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show pppoe-server

show queueing

show queueing
Show ethernet queueing information

show reboot

show reboot <ENTER>
Show scheduled reboot

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show reboot

show route-map

show route-map
- show route-map <ENTER>
  Show route-map information
- show route-map {WORD} <ENTER>
  Show specified route-map information

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show route-map

show shutdown

show shutdown <ENTER>
Show scheduled shutdown

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show shutdown

show snmp

show snmp
Show status of SNMP on localhost

show system

show system
Show system information
- show system boot-messages
  - show system boot-messages <ENTER>
    Show most recent kernel boot messages
  - show system boot-messages all <ENTER>
    Show all kernel boot messages
- show system commit
  - show system commit <ENTER>
    Show commit revisions log
  - show system commit diff {diff} <ENTER>
    show commit revision diff
  - show system commit file {file}
    - show system commit file {file} <ENTER>
      show commit revision file
    - show system commit file {file} compare
      - show system commit file {file} compare <ENTER>
        compare config file revisions
      - show system commit file {file} compare commands <ENTER>
        compare config file revisions
- show system connections
  - show system connections <ENTER>
    Show active network connections on the system
  - show system connections tcp
    - show system connections tcp <ENTER>
      show TCP connection information
    - show system connections tcp all <ENTER>
      show all TCP connections
    - show system connections tcp numeric <ENTER>
      show TCP connection without resolving names
  - show system connections udp
    - show system connections udp <ENTER>
      show UDP socket information
    - show system connections udp numeric <ENTER>
      show UDP socket information without resolving names
- show system image
  - show system image <ENTER>
    Show installed Vyatta images
  - show system image storage <ENTER>
    Show disk space utilization of system images
- show system kernel-messages <ENTER>
  Show messages in kernel ring buffer
- show system login users
  Show user accounts
  - show system login users <ENTER>
    Show user account information
  - show system login users all <ENTER>
    Show information about all accounts
  - show system login users locked <ENTER>
    Show information about locked accounts
  - show system login users other <ENTER>
    Show information about non-Vyatta accounts
  - show system login users vyatta <ENTER>
    Show information about vyatta accounts
- show system memory
  - show system memory <ENTER>
    Display system memory usage
  - show system memory cache <ENTER>
    Show kernel cache information
  - show system memory detail <ENTER>
    Report detailed system memory usage
  - show system memory quagga <ENTER>
    Show Quagga memory usage
- show system processes
  - show system processes <ENTER>
    Show system processes
  - show system processes extensive <ENTER>
    Show extensive process info
  - show system processes summary <ENTER>
    Show summary of system processes
  - show system processes tree <ENTER>
    Show process tree
- show system routing-daemons <ENTER>
  Show Quagga routing daemons
- show system storage <ENTER>
  Show filesystem usage
- show system uptime <ENTER>
  Show how long the system has been up

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show system

show table

show table <ENTER>
Show routing table

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show table

show tech-support

show tech-support
Show consolidated tech-support report
- show tech-support <ENTER>
  Show consolidated tech-support report
- show tech-support brief
  - show tech-support brief <ENTER>
    Show brief tech-support report
  - show tech-support brief save
    - show tech-support brief save <ENTER>
      Save brief tech-support report
    - show tech-support brief save {URL} <ENTER>
      Save compressed brief tech-support report to specified path/file
  - show tech-support brief save-uncompressed
    - show tech-support brief save-uncompressed <ENTER>
      Save uncompressed brief tech-support report
    - show tech-support brief save-uncompressed {URL} <ENTER>
      Save uncompressed brief tech-support report to specified path/file
- show tech-support save
  - show tech-support save <ENTER>
    Save consolidated tech-support report
  - show tech-support save {URL} <ENTER>
    Save compressed tech-support report to the specified path/file
- show tech-support save-uncompressed
  - show tech-support save-uncompressed <ENTER>
    Save consolidated tech-support report uncompressed
  - show tech-support save-uncompressed {URL} <ENTER>
    Save uncompressed tech-support report to specified path/file

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show tech-support

show ubnt

show ubnt
Show UBNT information
- show ubnt discover
  - show ubnt discover <ENTER>
    Show UBNT discovered devices
  - show ubnt discover detail <ENTER>
    Show UBNT discovered devices detail
- show ubnt offload <ENTER>
  Show UBNT offload status

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show ubnt

show update

show update
Run an update command
- show update webproxy blacklists
  - show update webproxy blacklists <ENTER>
    Update the webproxy blacklist database
  - show update webproxy blacklists category {webproxy blacklist category} <ENTER>
    Update a category of the webproxy blacklist database

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show update

show upnp2

show upnp2 rules <ENTER>
UPnP firewall rules and NAT port forwards

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show upnp2

show users

show users <ENTER>
Show user information

ログイン中のユーザーの情報を表示

※ ログインしていないユーザーの情報を表示する場合は、show system login users になります。

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show users

show version

show version
- show version <ENTER>
  Show Vyatta version information
- show version added <ENTER>
  Show Vyatta version information plus added packages
- show version all <ENTER>
  Show Vyatta version information plus all packages changes
- show version deleted <ENTER>
  Show Vyatta version information plus deleted packages
- show version downgraded <ENTER>
  Show Vyatta version information plus downgraded packages
- show version quagga <ENTER>
  Show Quagga version information
- show version upgraded <ENTER>
  Show Vyatta version information plus upgraded packages

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show version

show vpn

show vpn
Show Virtual Private Network (VPN) information

show vrrp

show vrrp
- show vrrp <ENTER>
  Show Virtual Router Redundancy Protocol (VRRP) information
  - show vrrp interface {interface}
    - show vrrp interface {interface} <ENTER>
      Show VRRP information for specified interface
    - show vrrp interface {interface} group {GROUP} <ENTER>
      Show VRRP information for specified interface and group
  - show vrrp summary <ENTER>
    Show summary of VRRP information

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show vrrp

show webproxy

show webproxy
Show webproxy information
- show webproxy blacklist
  - show webproxy blacklist categories <ENTER>
    Show webproxy blacklist categories
  - show webproxy blacklist domains
    - show webproxy blacklist domains <ENTER>
      Show webproxy blacklist domains
    - show webproxy blacklist domains {★DOMAINS★} <ENTER>
      ★★★
  - show webproxy blacklist log
    - show webproxy blacklist log <ENTER>
      Show contents of webproxy blacklist log
    - show webproxy blacklist log summary <ENTER>
      Show summary of webproxy blacklist log
  - show webproxy blacklist search {★SEARCH★} <ENTER>
    Show webproxy blacklist search
  - show webproxy blacklist urls <ENTER>
    Show webproxy blacklist urls
- show webproxy log <ENTER>
  Show contents of webproxy access log
- show webproxy update-log <ENTER>
  Show update log for url-filter database

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show webproxy

show zebra

show zebra <ENTER>
Show information for zebra route daemon

コマンド実行例 : コマンド実行例＞ show (operational) ＞ show zebra

コマンド ＞ show (operational)

このページの概要

show コマンドの使い方

index

show arp

show bridge

show configuration

show conntrack

show date

show debugging

show dhcp

show dhcpv6

show dhcpv6-pd

show disk

show dns

show firewall

show flow-accounting

show hardware

show history

show host

show incoming

show interfaces

show ip

show ipv6

show lldp

show load-balance

show log

show login

show nat

show ntp

show openvpn

show pppoe-server

show queueing

show reboot

show route-map

show shutdown

show snmp

show system

show table

show tech-support

show ubnt

show update

show upnp2

show users

show version

show vpn

show vrrp

show webproxy

show zebra

関連項目

ご意見を共有しましょう

案内メニュー

検索

コマンド＞ show (operational)