2016/02/23 EdgeMAX シリーズのファームウェア v1.8.0 がリリースされました。
詳細はこちら をご覧下さい。

「コマンド ＞ show (operational)」の版間の差分

提供：EdgeOS 日本語Wiki [非公式]
ナビゲーションに移動 検索に移動
編集の要約なし
 
(同じ利用者による、間の47版が非表示)
1行目: 1行目:
== このページの概要 ==
== このページの概要 ==
当ページでは、Operational モード show コマンドの使い方をご紹介します。
当ページでは、Operational モード show コマンドの使い方をご紹介します。
コマンドの実行例は、ページ下部の関連項目からアクセスして下さい。


== show コマンドの使い方 ==
== show コマンドの使い方 ==
99行目: 101行目:
* show '''arp'''
* show '''arp'''
*: Show Address Resolution Protocol (ARP) information
*: Show Address Resolution Protocol (ARP) information
** show arp <ENTER>
**: Show Address Resolution Protocol (ARP) information
** show arp '''[[パラメーター ＞ interface|{interface}]]''' <ENTER>
**: Show Address Resolution Protocol (ARP) for a specific interface


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show arp]]


=== show bridge ===
=== show bridge ===
* show '''bridge'''
* show '''bridge'''
*: Show bridging information
** show bridge <ENTER>
**: Show bridging information
** show bridge '''{★BRIDGE★}'''
*** show bridge {★BRIDGE★} <ENTER>
***: ★★★
*** show bridge {★BRIDGE★} '''macs''' <ENTER>
***: Show bridge Media Access Control (MAC) address table
*** show bridge {★BRIDGE★} '''spanning-tree''' <ENTER>
***: Show bridge spanning tree information


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show bridge]]


=== show configuration ===
=== show configuration ===
* show '''configuration'''
* show '''configuration'''
*: Show running configuration
** show configuration <ENTER>
**: Show running configuration
** show configuration '''all''' <ENTER>
**: Show running configuration (including default values)
** show configuration '''commands''' <ENTER>
**: Show running configuration as set commands


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show configuration]]


=== show conntrack ===
=== show conntrack ===
* show '''conntrack'''
* show '''conntrack'''
*: Show conntrack entries in the conntrack table  
*: Show conntrack entries in the conntrack table
** show conntrack '''ignore''' <ENTER>
**: Show Conntrack ignore rules and counters
** show conntrack '''table'''
**: Show conntrack entries for table
*** show conntrack table '''ipv4'''
**** show conntrack table ipv4 <ENTER>
****: Show Conntrack entries for IPv4 protocol
**** show conntrack table ipv4 '''source [[パラメーター ＞ IPv4 アドレス|{IPv4-address(:port)}]]'''
***** show conntrack table ipv4 source [[パラメーター ＞ IPv4 アドレス|{IPv4-address(:port)}]] <ENTER>
*****: Show Conntrack entries for the source IP
***** show conntrack table ipv4 source [[パラメーター ＞ IPv4 アドレス|{IPv4-address(:port)}]] '''destination [[パラメーター ＞ IPv4 アドレス|{IPv4-address(:port)}]]''' <ENTER>
*****: Show Conntrack entries for the destination IP
*** show conntrack table '''ipv6'''
**** show conntrack table ipv6 <ENTER>
****: Show Conntrack entries for IPv6 protocol
**** show conntrack table ipv6 '''source [[パラメーター ＞ IPv6 アドレス|{IPv6-address(:port)}]]'''
***** show conntrack table ipv6 source [[パラメーター ＞ IPv6 アドレス|{IPv6-address(:port)}]] <ENTER>
*****: Show Conntrack entries for the source IP
***** show conntrack table ipv6 source [[パラメーター ＞ IPv6 アドレス|{IPv6-address(:port)}]] '''destination [[パラメーター ＞ IPv6 アドレス|{IPv6-address(:port)}]]''' <ENTER>
*****: Show Conntrack entries for the destination IP


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show conntrack]]


=== show date ===
=== show date ===
* show '''date'''
* show '''date'''
*: Show system date and time
** show date <ENTER>
**: Show system date and time
*** show date '''utc''' <ENTER>
***: Show system date and time as Coordinated Universal Time


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show date]]


=== show debugging ===
=== show debugging ===
* show '''debugging'''
* show '''debugging'''
*: Show route protocol debugging flags
*: Show route protocol debugging flags
** show debugging '''bgp''' <ENTER>
**: Show Border Gateway Protocol (BGP) debugging flags
** show debugging '''ospf''' <ENTER>
**: Show Open Shortest Path First (OSPF) protocol debugging flags
** show debugging '''ospfv3''' <ENTER>
**: Show IPv6 Open Shortest Path First (OSPFv3) protocol debugging flags
** show debugging '''rip''' <ENTER>
**: Show Routing Information Protocol (RIP) debugging flags
** show debugging '''ripng''' <ENTER>
**: Show RIPNG protocol debugging flags
** show debugging '''zebra''' <ENTER>
**: Show zebra debugging flags


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show debugging]]


=== show dhcp ===
=== show dhcp ===
* show '''dhcp'''
* show '''dhcp'''
*: Show Dynamic Host Configuration Protocol (DHCP) information
*: Show Dynamic Host Configuration Protocol (DHCP) information
** show dhcp '''client leases'''
*** show dhcp client leases <ENTER>
***: Show DHCP client leases
*** show dhcp client leases '''interface [[パラメーター ＞ interface|{interface}]]''' <ENTER>
***: Show DHCP client information for interface
** show dhcp '''leases'''
*** show dhcp leases <ENTER>
***: Show current DHCP leases
*** show dhcp leases '''expired''' <ENTER>
***: Show expired DHCP leases
*** show dhcp leases '''pool [[パラメーター ＞ DHCP Pool エントリ名|{DHCP Pool エントリ名}]]'''
**** show dhcp leases pool [[パラメーター ＞ DHCP Pool エントリ名|{DHCP Pool エントリ名}]] <ENTER>
****: Show current DHCP leases for a specific pool
**** show dhcp leases pool [[パラメーター ＞ DHCP Pool エントリ名|{DHCP Pool エントリ名}]] '''expired''' <ENTER>
****: Show expired DHCP leases for a specific pool
** show dhcp '''statistics'''
*** show dhcp statistics <ENTER>
***: Show current DHCP statistics
*** show dhcp statistics '''pool [[パラメーター ＞ DHCP Pool エントリ名|{DHCP Pool エントリ名}]]''' <ENTER>
***: Show current DHCP statistics for a specific pool
コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show dhcp]]
==== 解説 ====
<code>show dhcp client leases</code> のみ、DHCP クライアント としての EdgeOS の情報、それ以外は DHCP サーバー としての EdgeOS の情報になります。


<code>show dhcp client leases</code> により、CATV 等の回線で、'''WAN側 DHCP で割り当てられた DNS の情報を確認することができます'''。詳細は、[[コマンド実行例 ＞ show (operational) ＞ show dhcp|コマンド実行例]] をご覧下さい。


=== show dhcpv6 ===
=== show dhcpv6 ===
* show '''dhcpv6'''
* show '''dhcpv6'''
*: Show status related to DHCPv6
*: Show status related to DHCPv6
** show dhcpv6 '''client leases''' <ENTER>
**: Display DHCPv6 client leases
** show dhcpv6 '''relay-agent status''' <ENTER>
**: Show status of DHCPv6 Relay Agent
** show dhcpv6 '''server'''
**: Show DHCPv6 server information
*** show dhcpv6 server '''leases''' <ENTER>
***: Show DHCPv6 Server Leases
*** show dhcpv6 server '''status''' <ENTER>
***: Show DHCPv6 Server Status


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show dhcpv6]]


=== show dhcpv6-pd ===
=== show dhcpv6-pd ===
* show '''dhcpv6-pd'''
* show '''dhcpv6-pd'''
*: Show status related to DHCPv6 Prefix Delegation
*: Show status related to DHCPv6 Prefix Delegation
** show dhcpv6-pd '''duid''' <ENTER>
**: Show DHCPv6-PD DUID
** show dhcpv6-pd '''log''' <ENTER>
**: Show DHCPv6-PD log file


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show dhcpv6-pd]]


=== show disk ===
=== show disk ===
* show '''disk'''
* show '''disk [[パラメーター ＞ disk|{disk}]] format''' <ENTER>
*: Show disk drive formatting
<!--
*: Show status of disk device
*: Show status of disk device
-->


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show disk]]


=== show dns ===
=== show dns ===
* show '''dns'''
* show '''dns'''
*: Show Domain Name Server (DNS) information
*: Show Domain Name Server (DNS) information
** show dns '''dynamic status''' <ENTER>
**: Show Dynamic DNS status
** show dns '''forwarding'''
**: Show DNS forwarding information
*** show dns forwarding '''nameservers''' <ENTER>
***: Show DNS forwarding nameservers information
*** show dns forwarding '''statistics''' <ENTER>
***: Show DNS forwarding statistics


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show dns]]


=== show firewall ===
=== show firewall ===
* show '''firewall'''
* show '''firewall'''
*: Show firewall information
** show firewall <ENTER>
**: Show firewall information
** show firewall '''group'''
*** show firewall group <ENTER>
***: Show firewall/nat groups
*** show firewall group '''[[パラメーター ＞ firewall group|{firewall group name}]]''' <ENTER>
***: Show firewall/nat group
** show firewall '''ipv6-modify'''
*** show firewall ipv6-modify <ENTER>
***: Show IPv6 firewall modify chains
*** show firewall ipv6-modify '''statistics''' <ENTER>
***: Show firewall counter information
*** show firewall ipv6-modify '''{★firewall ipv6-modify★}'''
**** show firewall ipv6-modify {★firewall ipv6-modify★} <ENTER>
****: ★★★
**** show firewall ipv6-modify {★firewall ipv6-modify★} '''rule {★firewall ipv6-modify rule★}''' <ENTER>
****: Show summary of IPv6 firewall modify rules
**** show firewall ipv6-modify {★firewall ipv6-modify★} '''statistics''' <ENTER>
****: Show IPv6 firewall modify counter information
** show firewall '''ipv6-name'''
*** show firewall ipv6-name <ENTER>
***: Show IPv6 firewall chains
*** show firewall ipv6-name '''statistics''' <ENTER>
***: Show firewall counter information
*** show firewall ipv6-name '''[[パラメーター ＞ IPv6 ファイアウォール name エントリ名|{IPv6 ファイアウォール}]]'''
**** show firewall ipv6-name [[パラメーター ＞ IPv6 ファイアウォール name エントリ名|{IPv6 ファイアウォール}]] <ENTER>
****:★★★
**** show firewall ipv6-name [[パラメーター ＞ IPv6 ファイアウォール name エントリ名|{IPv6 ファイアウォール}]] '''rule {★IPv6 ファイアウォール ルール★}''' <ENTER>
****: Show summary of IPv6 firewall rules
**** show firewall ipv6-name [[パラメーター ＞ IPv6 ファイアウォール name エントリ名|{IPv6 ファイアウォール}]] '''statistics''' <ENTER>
****: Show IPv6 firewall counter information
** show firewall '''modify'''
*** show firewall modify <ENTER>
***: Show IPv4 firewall modify chains
*** show firewall modify '''statistics''' <ENTER>
***: Show firewall counter information
*** show firewall modify '''{★firewall modify★}'''
**** show firewall modify {★firewall modify★} <ENTER>
****: ★★★
**** show firewall modify {★firewall modify★} '''rule {★firewall modify rule★} <ENTER>
****: Show summary of IPv4 firewall modify rules
**** show firewall modify {★firewall modify★} '''statistics''' <ENTER>
****: Show IPv4 firewall modify counter information
** show firewall '''name'''
*** show firewall name <ENTER>
***: Show IPv4 firewall chains
*** show firewall name '''statistics''' <ENTER>
***: Show firewall counter information
*** show firewall name '''[[パラメーター ＞ IPv4 ファイアウォール name エントリ名|{IPv4 ファイアウォール}]]'''
**** show firewall name [[パラメーター ＞ IPv4 ファイアウォール name エントリ名|{IPv4 ファイアウォール}]] <ENTER>
****: Show rules for given IPv4 firewall chain
**** show firewall name [[パラメーター ＞ IPv4 ファイアウォール name エントリ名|{IPv4 ファイアウォール}]] '''rule [[パラメーター ＞ IPv4 ファイアウォール ルール|{IPv4 ファイアウォール ルール}]]''' <ENTER>
****: Show summary of IPv4 firewall rules
**** show firewall name [[パラメーター ＞ IPv4 ファイアウォール name エントリ名|{IPv4 ファイアウォール}]] '''statistics''' <ENTER>
****: Show IPv4 firewall counter information
** show firewall '''statistics''' <ENTER>
**: Show firewall counter information


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show firewall]]


=== show flow-accounting ===
=== show flow-accounting ===
* show '''flow-accounting'''
* show '''flow-accounting'''
*: Show flow accounting statistics
* show flow-accounting
** show flow-accounting <ENTER>
**: Show flow accounting statistics
** show flow-accounting '''egress'''
*** show flow-accounting egress <ENTER>
***: Show flow accounting statistics
*** show flow-accounting egress '''interface [[パラメーター ＞ interface|{interface}]]'''
**** show flow-accounting egress interface [[パラメーター ＞ interface|{interface}]] <ENTER>
****: Show flow accounting statistics for specified interface
**** show flow-accounting egress interface [[パラメーター ＞ interface|{interface}]] '''host [[パラメーター ＞ IPv4 アドレス|{x.x.x.x}]]''' <ENTER>
****: Show flow accounting statistics for specified interface/host
**** show flow-accounting egress interface [[パラメーター ＞ interface|{interface}]] '''port [[パラメーター ＞ port|{0-65536}]]''' <ENTER>
****: Show flow accounting statistics for specified interface/port
**** show flow-accounting egress interface [[パラメーター ＞ interface|{interface}]] '''top {0-N}''' <ENTER>
****: Show flow accounting statistics for top N
** show flow-accounting '''interface [[パラメーター ＞ interface|{interface}]]'''
*** show flow-accounting interface [[パラメーター ＞ interface|{interface}]] <ENTER>
***: Show flow accounting statistics for specified interface
*** show flow-accounting interface [[パラメーター ＞ interface|{interface}]] '''host [[パラメーター ＞ IPv4 アドレス|{x.x.x.x}]]''' <ENTER>
***: Show flow accounting statistics for specified interface/host
*** show flow-accounting interface [[パラメーター ＞ interface|{interface}]] '''port [[パラメーター ＞ port|{0-65536}]]''' <ENTER>
***: Show flow accounting statistics for specified interface/port
*** show flow-accounting interface [[パラメーター ＞ interface|{interface}]] '''top {0-N}''' <ENTER>
***: Show flow accounting statistics for top N
 


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show flow-accounting]]


=== show hardware ===
=== show hardware ===
* show '''hardware'''
* show '''hardware'''
*: Show system hardware details
*: Show system hardware details
** show hardware '''cpu'''
*** show hardware cpu <ENTER>
***: Show CPU info
*** show hardware cpu '''detail''' <ENTER>
***: Show system CPU details
*** show hardware cpu '''summary''' <ENTER>
***: Show CPU's on system
** show hardware '''mem''' <ENTER>
**: Show system RAM details
** show hardware '''temperature''' <ENTER>
**: Show hardware temperature


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show hardware]]


=== show history ===
=== show history ===
219行目: 443行目:
* show '''nat'''
* show '''nat'''
*: Show Network Address Translation (NAT) information
*: Show Network Address Translation (NAT) information
** show nat '''rules''' <ENTER>
**: Show configured NAT rule set
** show nat '''statistics''' <ENTER>
**: Show statistics for configured NAT rules
** show nat '''translations'''
*** show nat translations <ENTER>
***: Show active NAT translations
*** show nat translations '''destination'''
**** show nat translations destination <ENTER>
****: Show active NAT destination translations
**** show nat translations destination '''address [[パラメーター ＞ IPv4 アドレス|{x.x.x.x}]]''' <ENTER>
****: Show active NAT destination translations for an IP address
**** show nat translations destination '''detail''' <ENTER>
****: Show active NAT destination translations detail
**** show nat translations destination '''monitor'''
***** show nat translations destination monitor <ENTER>
*****: Show active NAT destination translations events
***** show nat translations destination monitor '''detail''' <ENTER>
*****:Show active NAT destination translations events detail
*** show nat translations '''detail''' <ENTER>
***: Show active NAT translations detail
*** show nat translations '''monitor'''
**** show nat translations monitor <ENTER>
****: Show active NAT translations events
**** show nat translations monitor '''detail''' <ENTER>
****: Show active NAT translations events verbose
*** show nat translations '''source'''
**** show nat translations source <ENTER>
****: Show active NAT source translations
**** show nat translations source '''address [[パラメーター ＞ IPv4 アドレス|{x.x.x.x}]]''' <ENTER>
****: Show active NAT source translations for an IP address
**** show nat translations source '''detail''' <ENTER>
****: Show active NAT source translations detail
**** show nat translations source '''monitor'''
***** show nat translations source monitor <ENTER>
*****: Show active NAT source translations events
***** show nat translations source monitor '''detail''' <ENTER>
*****: Show active NAT source translations events


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show nat]]


=== show ntp ===
=== show ntp ===
* show '''ntp'''
* show '''ntp'''
*: Show peer status of network time daemon
** show ntp <ENTER>
**: Show peer status of network time daemon
** show ntp '''{ntp server [[パラメーター ＞ hostname|hostname]]|ntp server [[パラメーター ＞ IPv4 アドレス|IP address]]}''' <ENTER>
**: Show date and time of specified NTP server
 


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show ntp]]


=== show openvpn ===
=== show openvpn ===
* show '''openvpn'''
* show '''openvpn status'''
*: Show OpenVPN information
*: Show OpenVPN information
** show openvpn status '''client''' <ENTER>
**: Show tunnel status for OpenVPN client
** show openvpn status '''server''' <ENTER>
**: Show tunnel status for OpenVPN server
** show openvpn status '''site-to-site''' <ENTER>
**: Show tunnel status for OpenVPN site-to-site


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show openvpn]]


=== show pppoe-server ===
=== show pppoe-server ===
* show '''pppoe-server'''
* show '''pppoe-server''' <ENTER>
*: Show active PPPoE server sessions
*: Show active PPPoE server sessions


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show pppoe-server]]


=== show queueing ===
=== show queueing ===
* show '''queueing'''
* show '''queueing'''
*: Show ethernet queueing information
** show queueing <ENTER>
**: Show ethernet queueing information
** show queueing '''adsl'''
*** show queueing adsl <ENTER>
***: Show adsl queueing information
*** show queueing adsl '''{★adsl★}''' <ENTER>
***: ★★★
** show queueing '''bonding'''
*** show queueing bonding <ENTER>
***: Show bonding queueing information
*** show queueing bonding '''{★bonding★}'''
**** show queueing bonding {★bonding★} <ENTER>
****: ★★★
**** show queueing bonding {★bonding★} '''vif'''
***** show queueing bonding {★bonding★} vif <ENTER>
*****: Show specified virtual network interface (vif) information
***** show queueing bonding {★bonding★} vif '''{★vif★}''' <ENTER>
*****: ★★★
** show queueing '''ethernet'''
*** show queueing ethernet <ENTER>
***: Show ethernet queueing information
*** show queueing ethernet '''[[パラメーター ＞ interface|{interface / ethernet}]]'''
**** show queueing ethernet [[パラメーター ＞ interface|{interface / ethernet}]] <ENTER>
****: Show specified ethernet interface information
**** show queueing ethernet [[パラメーター ＞ interface|{interface / ethernet}]] '''vif'''
***** show queueing ethernet [[パラメーター ＞ interface|{interface / ethernet}]] vif <ENTER>
*****: Show specified virtual network interface (vif) information
***** show queueing ethernet [[パラメーター ＞ interface|{interface / ethernet}]] vif '''{★vif★}''' <ENTER>
*****: ★★★
** show queueing '''input'''
*** show queueing input <ENTER>
***: Show input queueing information
*** show queueing input '''{★input★}''' <ENTER>
***: ★★★
** show queueing '''pppoe'''
*** show queueing pppoe <ENTER>
***: Show pppoe interface queueing information
*** show queueing pppoe '''{★pppoe★}'''
**** show queueing pppoe {★pppoe★} <ENTER>
****: ★★★
**** show queueing pppoe {★pppoe★} '''vif'''
***** show queueing pppoe {★pppoe★} vif <ENTER>
*****: Show specified virtual network interface (vif) information
***** show queueing pppoe {★pppoe★} vif '''{★vif★}''' <ENTER>
*****: ★★★
** show queueing '''pseudo-ethernet''' <ENTER>
**: Show tunnel queueing information
** show queueing '''serial'''
*** show queueing serial <ENTER>
***: Show serial queueing information
*** show queueing serial '''{★serial★}''' <ENTER>
***: ★★★
** show queueing '''tunnel''' <ENTER>
**: Show tunnel queueing information
** show queueing '''vti''' <ENTER>
**: Show vti queueing information
** show queueing '''wireless'''
*** show queueing wireless <ENTER>
***: Show wireless queueing information
*** show queueing wireless '''{★wireless★}'''
**** show queueing wireless {★wireless★} <ENTER>
****: ★★★
**** show queueing wireless {★wireless★} '''vif'''
***** show queueing wireless {★wireless★} vif <ENTER>
*****: Show specified virtual network interface (vif) information
***** show queueing wireless {★wireless★} vif '''{★vif★}''' <ENTER>
*****: ★★★


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show queueing]]


=== show reboot ===
=== show reboot ===
* show '''reboot'''
* show '''reboot''' <ENTER>
*: Show scheduled reboot
*: Show scheduled reboot


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show reboot]]


=== show route-map ===
=== show route-map ===
* show '''route-map'''
* show '''route-map'''
*: Show route-map information
** show route-map <ENTER>
**: Show route-map information
** show route-map '''{WORD}''' <ENTER>
**: Show specified route-map information


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show route-map]]


=== show shutdown ===
=== show shutdown ===
* show '''shutdown'''
* show '''shutdown''' <ENTER>
*: Show scheduled shutdown
*: Show scheduled shutdown


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show shutdown]]


=== show snmp ===
=== show snmp ===
* show '''snmp'''
* show '''snmp'''
*: Show status of SNMP on localhost
** show snmp <ENTER>
**: Show status of SNMP on localhost
** show snmp '''community [[パラメーター ＞ SNMP Community|{SNMP Community}]]'''
*** show snmp community [[パラメーター ＞ SNMP Community|{SNMP Community}]] <ENTER>
***: Show status of specified SNMP community
*** show snmp community [[パラメーター ＞ SNMP Community|{SNMP Community}]] '''host {[[パラメーター ＞ hostname|hostname]]|[[パラメーター ＞ IPv4 アドレス|x.x.x.x]]}''' <ENTER>
***: Show status of SNMP on remote host
** show snmp '''mib ifmib'''
*** show snmp mib ifmib <ENTER>
***: Show SNMP interfaces MIB information
*** show snmp mib ifmib '''ifAlias'''
**** show snmp mib ifmib ifAlias <ENTER>
****: Show SNMP ifAlias for all interfaces
**** show snmp mib ifmib ifAlias '''[[パラメーター ＞ interface|{interface}]]''' <ENTER>
****: (Show SNMP ifAlias for specified interfaces)
*** show snmp mib ifmib '''ifDescr'''
**** show snmp mib ifmib ifDescr <ENTER>
****: Show SNMP ifDescr for all interfaces
**** show snmp mib ifmib ifDescr '''[[パラメーター ＞ interface|{interface}]]''' <ENTER>
****: (Show SNMP ifDescr for specified interfaces)
*** show snmp mib ifmib '''ifIndex'''
**** show snmp mib ifmib ifIndex <ENTER>
****: Show SNMP ifIndex for all interfaces
**** show snmp mib ifmib ifIndex '''[[パラメーター ＞ interface|{interface}]]''' <ENTER>
****: (Show SNMP ifIndex for specified interfaces)
** show snmp '''v3'''
*** show snmp v3 <ENTER>
***: Show status of SNMP v3 on localhost
*** show snmp v3 '''certificates''' <ENTER>
***: Show TSM certificates
*** show snmp v3 '''group''' <ENTER>
***: Show the list of configured groups
*** show snmp v3 '''trap-target''' <ENTER>
***: Show the list of configured targets
*** show snmp v3 '''user''' <ENTER>
***: Show the list of configured users
*** show snmp v3 '''view''' <ENTER>
***: Show the list of configured views
 


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show snmp]]


=== show system ===
=== show system ===
* show '''system'''
* show '''system'''
*: Show system information
*: Show system information
** show system '''boot-messages'''
*** show system boot-messages <ENTER>
***: Show most recent kernel boot messages
*** show system boot-messages '''all''' <ENTER>
***: Show all kernel boot messages
** show system '''commit'''
*** show system commit <ENTER>
***: Show commit revisions log
*** show system commit '''diff {diff}''' <ENTER>
***: show commit revision diff
*** show system commit '''file {file}'''
**** show system commit file {file} <ENTER>
****: show commit revision file
**** show system commit file {file} '''compare'''
***** show system commit file {file} compare <ENTER>
*****: compare config file revisions
***** show system commit file {file} compare '''commands''' <ENTER>
*****: compare config file revisions
** show system '''connections'''
*** show system connections <ENTER>
***: Show active network connections on the system
*** show system connections '''tcp'''
**** show system connections tcp <ENTER>
****: show TCP connection information
**** show system connections tcp '''all''' <ENTER>
****: show all TCP connections
**** show system connections tcp '''numeric''' <ENTER>
****: show TCP connection without resolving names
*** show system connections '''udp'''
**** show system connections udp <ENTER>
****: show UDP socket information
**** show system connections udp '''numeric''' <ENTER>
****: show UDP socket information without resolving names
** show system '''image'''
*** show system image <ENTER>
***: Show installed Vyatta images
*** show system image '''storage''' <ENTER>
***: Show disk space utilization of system images
** show system '''kernel-messages''' <ENTER>
**: Show messages in kernel ring buffer
** show system '''login users'''
**: Show user accounts
*** show system login users <ENTER>
***: Show user account information
*** show system login users '''all''' <ENTER>
***: Show information about all accounts
*** show system login users '''locked''' <ENTER>
***: Show information about locked accounts
*** show system login users '''other''' <ENTER>
***: Show information about non-Vyatta accounts
*** show system login users '''vyatta''' <ENTER>
***: Show information about vyatta accounts
** show system '''memory'''
*** show system memory <ENTER>
***: Display system memory usage
*** show system memory '''cache''' <ENTER>
***: Show kernel cache information
*** show system memory '''detail''' <ENTER>
***: Report detailed system memory usage
*** show system memory '''quagga''' <ENTER>
***: Show Quagga memory usage
** show system '''processes'''
*** show system processes <ENTER>
***: Show system processes
*** show system processes '''extensive''' <ENTER>
***: Show extensive process info
*** show system processes '''summary''' <ENTER>
***: Show summary of system processes
*** show system processes '''tree''' <ENTER>
***: Show process tree
** show system '''routing-daemons''' <ENTER>
**: Show Quagga routing daemons
** show system '''storage''' <ENTER>
**: Show filesystem usage
** show system '''uptime''' <ENTER>
**: Show how long the system has been up


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show system]]


=== show table ===
=== show table ===
* show '''table'''
* show '''table''' <ENTER>
*: Show routing table
*: Show routing table


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show table]]


=== show tech-support ===
=== show tech-support ===
* show '''tech-support'''
* show '''tech-support'''
*: Show consolidated tech-support report
*: Show consolidated tech-support report
** show tech-support <ENTER>
**: Show consolidated tech-support report
** show tech-support '''brief'''
*** show tech-support brief <ENTER>
***: Show brief tech-support report
*** show tech-support brief '''save'''
**** show tech-support brief save <ENTER>
****: Save brief tech-support report
**** show tech-support brief save '''[[パラメーター ＞ URL|{URL}]]''' <ENTER>
****: Save compressed brief tech-support report to specified path/file
*** show tech-support brief '''save-uncompressed'''
**** show tech-support brief save-uncompressed <ENTER>
****: Save uncompressed brief tech-support report
**** show tech-support brief save-uncompressed '''[[パラメーター ＞ URL|{URL}]]''' <ENTER>
****: Save uncompressed brief tech-support report to specified path/file
** show tech-support '''save'''
*** show tech-support save <ENTER>
***: Save consolidated tech-support report
*** show tech-support save '''[[パラメーター ＞ URL|{URL}]]''' <ENTER>
***: Save compressed tech-support report to the specified path/file
** show tech-support '''save-uncompressed'''
*** show tech-support save-uncompressed <ENTER>
***: Save consolidated tech-support report uncompressed
*** show tech-support save-uncompressed '''[[パラメーター ＞ URL|{URL}]]''' <ENTER>
***: Save uncompressed tech-support report to specified path/file


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show tech-support]]


=== show ubnt ===
=== show ubnt ===
* show '''ubnt'''
* show '''ubnt'''
*: Show UBNT information
*: Show UBNT information
** show ubnt '''discover'''
*** show ubnt discover <ENTER>
***: Show UBNT discovered devices
*** show ubnt discover '''detail''' <ENTER>
***: Show UBNT discovered devices detail
** show ubnt '''offload''' <ENTER>
**: Show UBNT offload status


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show ubnt]]


=== show update ===
=== show update ===
* show '''update'''
* show '''update'''
*: Run an update command
*: Run an update command
** show update '''webproxy blacklists'''
*** show update webproxy blacklists <ENTER>
***: Update the webproxy blacklist database
*** show update webproxy blacklists '''category {webproxy blacklist category}''' <ENTER>
***: Update a category of the webproxy blacklist database


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show update]]


=== show upnp2 ===
=== show upnp2 ===
* show '''upnp2'''
* show '''upnp2 rules''' <ENTER>
*: show UPnp
*: UPnP firewall rules and NAT port forwards


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show upnp2]]


=== show users ===
=== show users ===
* show '''users'''
* show '''users''' <ENTER>
*: Show user information
*: Show user information
*: ログイン中のユーザーの情報を表示


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show users]]
==== 解説 ====
* ログイン中のユーザーについては、<code>[[#show_login|show login]] user</code> よりも詳細な情報が表示されます。
* ログインしていないユーザーの情報を表示する場合は、<code>[[#show_system|show system]] login users</code> を用います。


=== show version ===
=== show version ===
* show '''version'''
* show '''version'''
*: Show Vyatta version information
** show version <ENTER>
**: Show Vyatta version information
** show version '''added''' <ENTER>
**: Show Vyatta version information plus added packages
** show version '''all''' <ENTER>
**: Show Vyatta version information plus all packages changes
** show version '''deleted''' <ENTER>
**: Show Vyatta version information plus deleted packages
** show version '''downgraded''' <ENTER>
**: Show Vyatta version information plus downgraded packages
** show version '''quagga''' <ENTER>
**: Show Quagga version information
** show version '''upgraded''' <ENTER>
**: Show Vyatta version information plus upgraded packages


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show version]]


=== show vpn ===
=== show vpn ===
* show '''vpn'''
* show '''vpn'''
*: Show Virtual Private Network (VPN) information
*: Show Virtual Private Network (VPN) information
** show vpn '''debug'''
*** show vpn debug <ENTER>
***: Show VPN debugging information
*** show vpn debug '''detail''' <ENTER>
***: Show detailed VPN debugging information
*** show vpn debug '''peer {PEER}'''
**** show vpn debug peer {PEER} <ENTER>
****: Show debugging information for a peer
**** show vpn debug peer {PEER} '''tunnel {TUNNEL}''' <ENTER>
****: Show debugging information for a peer's tunnel
** show vpn '''ike'''
**: Show Internet Key Exchange (IKE) information
*** show vpn ike '''rsa-keys''' <ENTER>
***: Show VPN RSA keys
*** show vpn ike '''sa'''
**** show vpn ike sa <ENTER>
****: Show all currently active IKE Security Associations (SA)
**** show vpn ike sa '''nat-traversal''' <ENTER>
****: Show all currently active IKE Security Associations (SA) that are using NAT Traversal
**** show vpn ike sa '''peer {PEER}''' <ENTER>
****: Show all currently active IKE Security Associations (SA) for a peer
*** show vpn ike '''secrets''' <ENTER>
***: Show all the pre-shared key secrets
*** show vpn ike '''status''' <ENTER>
***: Show summary of IKE process information
** show vpn '''ipsec'''
*** show vpn ipsec '''policy''' <ENTER>
***: Show the in-kernel crypto policies
*** show vpn ipsec '''sa'''
**** show vpn ipsec sa <ENTER>
****: Show all active IPsec Security Associations (SA)
**** show vpn ipsec sa '''detail'''
***** show vpn ipsec sa detail <ENTER>
*****: Show details for all active IPsec Security Associations (SA)
***** show vpn ipsec sa detail '''peer {PEER}'''
****** show vpn ipsec sa detail peer {PEER} <ENTER>
******: Show all active IPsec Security Associations (SA) for a peer
****** show vpn ipsec sa detail peer {PEER} '''tunnel {TUNNEL}''' <ENTER>
******: Show the active IPsec Security Association (SA) for a peer's tunnel
**** show vpn ipsec sa '''nat-traversal''' <ENTER>
****: Show all active IPsec Security Associations (SA) that are using NAT Traversal
**** show vpn ipsec sa '''peer {PEER}'''
***** show vpn ipsec sa peer {PEER} <ENTER>
*****: Show all active IPsec Security Associations (SA) for a peer
***** show vpn ipsec sa peer {PEER} '''tunnel {TUNNEL}''' <ENTER>
*****: Show the active IPsec Security Association (SA) for a peer's tunnel
**** show vpn ipsec sa '''statistics'''
***** show vpn ipsec sa statistics <ENTER>
*****: Show statistics of all active tunnels that have IPsec Security Associations (SA)
***** show vpn ipsec sa statistics '''peer {PEER}'''
****** show vpn ipsec sa statistics peer {PEER} <ENTER>
******: Show stats for all active IPsec Security Associations (SA) for a peer
****** show vpn ipsec sa statistics peer {PEER} '''tunnel {TUNNEL}''' <ENTER>
******: Show stats for the active IPsec Security Association (SA) for a peer's tunnel
*** show vpn ipsec '''state''' <ENTER>
***: Show the in-kernel crypto state
*** show vpn ipsec '''status''' <ENTER>
***: Show status of IPsec process
** show vpn '''remote-access''' <ENTER>
**: Show active remote access Virtual Private Network (VPN) sessions


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show vpn]]


=== show vrrp ===
=== show vrrp ===
* show '''vrrp'''
* show '''vrrp'''
*: Show Virtual Router Redundancy Protocol (VRRP) information
** show vrrp <ENTER>
**: Show Virtual Router Redundancy Protocol (VRRP) information
*** show vrrp '''interface [[パラメーター ＞ interface|{interface}]]'''
**** show vrrp interface [[パラメーター ＞ interface|{interface}]] <ENTER>
****: Show VRRP information for specified interface
**** show vrrp interface [[パラメーター ＞ interface|{interface}]] '''group {GROUP}''' <ENTER>
****: Show VRRP information for specified interface and group
*** show vrrp '''summary''' <ENTER>
***: Show summary of VRRP information
 


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show vrrp]]


=== show webproxy ===
=== show webproxy ===
* show '''webproxy'''
* show '''webproxy'''
*: Show webproxy information
*: Show webproxy information
** show webproxy '''blacklist'''
*** show webproxy blacklist '''categories''' <ENTER>
***: Show webproxy blacklist categories
*** show webproxy blacklist '''domains'''
**** show webproxy blacklist domains <ENTER>
****: Show webproxy blacklist domains
**** show webproxy blacklist domains '''{★DOMAINS★}''' <ENTER>
****: ★★★
*** show webproxy blacklist '''log'''
**** show webproxy blacklist log <ENTER>
****: Show contents of webproxy blacklist log
**** show webproxy blacklist log '''summary''' <ENTER>
****: Show summary of webproxy blacklist log
*** show webproxy blacklist '''search {★SEARCH★}''' <ENTER>
***: Show webproxy blacklist search
*** show webproxy blacklist '''urls''' <ENTER>
***: Show webproxy blacklist urls
** show webproxy '''log''' <ENTER>
**: Show contents of webproxy access log
** show webproxy '''update-log''' <ENTER>
**: Show update log for url-filter database


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show webproxy]]


=== show zebra ===
=== show zebra ===
* show '''zebra'''
* show '''zebra''' <ENTER>
*: Show information for zebra route daemon
*: Show information for zebra route daemon




 
コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show zebra]]


== 関連項目 ==
== 関連項目 ==
* [[コマンド実行例 ＞ show (operational)]]




2015年12月6日 (日) 06:35時点における最新版

このページの概要

当ページでは、Operational モード show コマンドの使い方をご紹介します。

コマンドの実行例は、ページ下部の関連項目からアクセスして下さい。

show コマンドの使い方

index

show arp

  • show arp
    Show Address Resolution Protocol (ARP) information
    • show arp <ENTER>
      Show Address Resolution Protocol (ARP) information
    • show arp {interface} <ENTER>
      Show Address Resolution Protocol (ARP) for a specific interface


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show arp

show bridge

  • show bridge
    • show bridge <ENTER>
      Show bridging information
    • show bridge {★BRIDGE★}
      • show bridge {★BRIDGE★} <ENTER>
        ★★★
      • show bridge {★BRIDGE★} macs <ENTER>
        Show bridge Media Access Control (MAC) address table
      • show bridge {★BRIDGE★} spanning-tree <ENTER>
        Show bridge spanning tree information


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show bridge

show configuration

  • show configuration
    • show configuration <ENTER>
      Show running configuration
    • show configuration all <ENTER>
      Show running configuration (including default values)
    • show configuration commands <ENTER>
      Show running configuration as set commands


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show configuration

show conntrack

  • show conntrack
    Show conntrack entries in the conntrack table
    • show conntrack ignore <ENTER>
      Show Conntrack ignore rules and counters
    • show conntrack table
      Show conntrack entries for table


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show conntrack

show date

  • show date
    • show date <ENTER>
      Show system date and time
      • show date utc <ENTER>
        Show system date and time as Coordinated Universal Time


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show date

show debugging

  • show debugging
    Show route protocol debugging flags
    • show debugging bgp <ENTER>
      Show Border Gateway Protocol (BGP) debugging flags
    • show debugging ospf <ENTER>
      Show Open Shortest Path First (OSPF) protocol debugging flags
    • show debugging ospfv3 <ENTER>
      Show IPv6 Open Shortest Path First (OSPFv3) protocol debugging flags
    • show debugging rip <ENTER>
      Show Routing Information Protocol (RIP) debugging flags
    • show debugging ripng <ENTER>
      Show RIPNG protocol debugging flags
    • show debugging zebra <ENTER>
      Show zebra debugging flags


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show debugging

show dhcp

  • show dhcp
    Show Dynamic Host Configuration Protocol (DHCP) information
    • show dhcp client leases
      • show dhcp client leases <ENTER>
        Show DHCP client leases
      • show dhcp client leases interface {interface} <ENTER>
        Show DHCP client information for interface
    • show dhcp leases
    • show dhcp statistics
      • show dhcp statistics <ENTER>
        Show current DHCP statistics
      • show dhcp statistics pool {DHCP Pool エントリ名} <ENTER>
        Show current DHCP statistics for a specific pool


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dhcp


解説

show dhcp client leases のみ、DHCP クライアント としての EdgeOS の情報、それ以外は DHCP サーバー としての EdgeOS の情報になります。


show dhcp client leases により、CATV 等の回線で、WAN側 DHCP で割り当てられた DNS の情報を確認することができます。詳細は、コマンド実行例 をご覧下さい。

show dhcpv6

  • show dhcpv6
    Show status related to DHCPv6
    • show dhcpv6 client leases <ENTER>
      Display DHCPv6 client leases
    • show dhcpv6 relay-agent status <ENTER>
      Show status of DHCPv6 Relay Agent
    • show dhcpv6 server
      Show DHCPv6 server information
      • show dhcpv6 server leases <ENTER>
        Show DHCPv6 Server Leases
      • show dhcpv6 server status <ENTER>
        Show DHCPv6 Server Status


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dhcpv6

show dhcpv6-pd

  • show dhcpv6-pd
    Show status related to DHCPv6 Prefix Delegation
    • show dhcpv6-pd duid <ENTER>
      Show DHCPv6-PD DUID
    • show dhcpv6-pd log <ENTER>
      Show DHCPv6-PD log file


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dhcpv6-pd

show disk

  • show disk {disk} format <ENTER>
    Show disk drive formatting


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show disk

show dns

  • show dns
    Show Domain Name Server (DNS) information
    • show dns dynamic status <ENTER>
      Show Dynamic DNS status
    • show dns forwarding
      Show DNS forwarding information
      • show dns forwarding nameservers <ENTER>
        Show DNS forwarding nameservers information
      • show dns forwarding statistics <ENTER>
        Show DNS forwarding statistics


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dns

show firewall

  • show firewall
    • show firewall <ENTER>
      Show firewall information
    • show firewall group
      • show firewall group <ENTER>
        Show firewall/nat groups
      • show firewall group {firewall group name} <ENTER>
        Show firewall/nat group
    • show firewall ipv6-modify
      • show firewall ipv6-modify <ENTER>
        Show IPv6 firewall modify chains
      • show firewall ipv6-modify statistics <ENTER>
        Show firewall counter information
      • show firewall ipv6-modify {★firewall ipv6-modify★}
        • show firewall ipv6-modify {★firewall ipv6-modify★} <ENTER>
          ★★★
        • show firewall ipv6-modify {★firewall ipv6-modify★} rule {★firewall ipv6-modify rule★} <ENTER>
          Show summary of IPv6 firewall modify rules
        • show firewall ipv6-modify {★firewall ipv6-modify★} statistics <ENTER>
          Show IPv6 firewall modify counter information
    • show firewall ipv6-name
    • show firewall modify
      • show firewall modify <ENTER>
        Show IPv4 firewall modify chains
      • show firewall modify statistics <ENTER>
        Show firewall counter information
      • show firewall modify {★firewall modify★}
        • show firewall modify {★firewall modify★} <ENTER>
          ★★★
        • show firewall modify {★firewall modify★} rule {★firewall modify rule★} <ENTER>
          Show summary of IPv4 firewall modify rules
        • show firewall modify {★firewall modify★} statistics <ENTER>
          Show IPv4 firewall modify counter information
    • show firewall name
    • show firewall statistics <ENTER>
      Show firewall counter information


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show firewall

show flow-accounting

  • show flow-accounting
  • show flow-accounting
    • show flow-accounting <ENTER>
      Show flow accounting statistics
    • show flow-accounting egress
      • show flow-accounting egress <ENTER>
        Show flow accounting statistics
      • show flow-accounting egress interface {interface}
        • show flow-accounting egress interface {interface} <ENTER>
          Show flow accounting statistics for specified interface
        • show flow-accounting egress interface {interface} host {x.x.x.x} <ENTER>
          Show flow accounting statistics for specified interface/host
        • show flow-accounting egress interface {interface} port {0-65536} <ENTER>
          Show flow accounting statistics for specified interface/port
        • show flow-accounting egress interface {interface} top {0-N} <ENTER>
          Show flow accounting statistics for top N
    • show flow-accounting interface {interface}
      • show flow-accounting interface {interface} <ENTER>
        Show flow accounting statistics for specified interface
      • show flow-accounting interface {interface} host {x.x.x.x} <ENTER>
        Show flow accounting statistics for specified interface/host
      • show flow-accounting interface {interface} port {0-65536} <ENTER>
        Show flow accounting statistics for specified interface/port
      • show flow-accounting interface {interface} top {0-N} <ENTER>
        Show flow accounting statistics for top N


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show flow-accounting

show hardware

  • show hardware
    Show system hardware details
    • show hardware cpu
      • show hardware cpu <ENTER>
        Show CPU info
      • show hardware cpu detail <ENTER>
        Show system CPU details
      • show hardware cpu summary <ENTER>
        Show CPU's on system
    • show hardware mem <ENTER>
      Show system RAM details
    • show hardware temperature <ENTER>
      Show hardware temperature


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show hardware

show history

  • show history
    show command history


show host

  • show host
    Show host information


show incoming

  • show incoming
    Show ethernet input-policy information


show interfaces

  • show interfaces
    Show network interface information


show ip

  • show ip
    Show IPv4 routing information


show ipv6

  • show ipv6
    Show IPv6 routing information


show lldp

  • show lldp
    Show lldp


show load-balance

  • show load-balance
    Show load-balance


show log

  • show log
    Show contents of current master log file


show login

  • show login
    Show current login credentials


show nat

  • show nat
    Show Network Address Translation (NAT) information
    • show nat rules <ENTER>
      Show configured NAT rule set
    • show nat statistics <ENTER>
      Show statistics for configured NAT rules
    • show nat translations
      • show nat translations <ENTER>
        Show active NAT translations
      • show nat translations destination
        • show nat translations destination <ENTER>
          Show active NAT destination translations
        • show nat translations destination address {x.x.x.x} <ENTER>
          Show active NAT destination translations for an IP address
        • show nat translations destination detail <ENTER>
          Show active NAT destination translations detail
        • show nat translations destination monitor
          • show nat translations destination monitor <ENTER>
            Show active NAT destination translations events
          • show nat translations destination monitor detail <ENTER>
            Show active NAT destination translations events detail
      • show nat translations detail <ENTER>
        Show active NAT translations detail
      • show nat translations monitor
        • show nat translations monitor <ENTER>
          Show active NAT translations events
        • show nat translations monitor detail <ENTER>
          Show active NAT translations events verbose
      • show nat translations source
        • show nat translations source <ENTER>
          Show active NAT source translations
        • show nat translations source address {x.x.x.x} <ENTER>
          Show active NAT source translations for an IP address
        • show nat translations source detail <ENTER>
          Show active NAT source translations detail
        • show nat translations source monitor
          • show nat translations source monitor <ENTER>
            Show active NAT source translations events
          • show nat translations source monitor detail <ENTER>
            Show active NAT source translations events


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show nat

show ntp

  • show ntp
    • show ntp <ENTER>
      Show peer status of network time daemon
    • show ntp {ntp server hostname|ntp server IP address} <ENTER>
      Show date and time of specified NTP server


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show ntp

show openvpn

  • show openvpn status
    Show OpenVPN information
    • show openvpn status client <ENTER>
      Show tunnel status for OpenVPN client
    • show openvpn status server <ENTER>
      Show tunnel status for OpenVPN server
    • show openvpn status site-to-site <ENTER>
      Show tunnel status for OpenVPN site-to-site


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show openvpn

show pppoe-server

  • show pppoe-server <ENTER>
    Show active PPPoE server sessions


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show pppoe-server

show queueing

  • show queueing
    • show queueing <ENTER>
      Show ethernet queueing information
    • show queueing adsl
      • show queueing adsl <ENTER>
        Show adsl queueing information
      • show queueing adsl {★adsl★} <ENTER>
        ★★★
    • show queueing bonding
      • show queueing bonding <ENTER>
        Show bonding queueing information
      • show queueing bonding {★bonding★}
        • show queueing bonding {★bonding★} <ENTER>
          ★★★
        • show queueing bonding {★bonding★} vif
          • show queueing bonding {★bonding★} vif <ENTER>
            Show specified virtual network interface (vif) information
          • show queueing bonding {★bonding★} vif {★vif★} <ENTER>
            ★★★
    • show queueing ethernet
    • show queueing input
      • show queueing input <ENTER>
        Show input queueing information
      • show queueing input {★input★} <ENTER>
        ★★★
    • show queueing pppoe
      • show queueing pppoe <ENTER>
        Show pppoe interface queueing information
      • show queueing pppoe {★pppoe★}
        • show queueing pppoe {★pppoe★} <ENTER>
          ★★★
        • show queueing pppoe {★pppoe★} vif
          • show queueing pppoe {★pppoe★} vif <ENTER>
            Show specified virtual network interface (vif) information
          • show queueing pppoe {★pppoe★} vif {★vif★} <ENTER>
            ★★★
    • show queueing pseudo-ethernet <ENTER>
      Show tunnel queueing information
    • show queueing serial
      • show queueing serial <ENTER>
        Show serial queueing information
      • show queueing serial {★serial★} <ENTER>
        ★★★
    • show queueing tunnel <ENTER>
      Show tunnel queueing information
    • show queueing vti <ENTER>
      Show vti queueing information
    • show queueing wireless
      • show queueing wireless <ENTER>
        Show wireless queueing information
      • show queueing wireless {★wireless★}
        • show queueing wireless {★wireless★} <ENTER>
          ★★★
        • show queueing wireless {★wireless★} vif
          • show queueing wireless {★wireless★} vif <ENTER>
            Show specified virtual network interface (vif) information
          • show queueing wireless {★wireless★} vif {★vif★} <ENTER>
            ★★★


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show queueing

show reboot

  • show reboot <ENTER>
    Show scheduled reboot


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show reboot

show route-map

  • show route-map
    • show route-map <ENTER>
      Show route-map information
    • show route-map {WORD} <ENTER>
      Show specified route-map information


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show route-map

show shutdown

  • show shutdown <ENTER>
    Show scheduled shutdown


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show shutdown

show snmp

  • show snmp
    • show snmp <ENTER>
      Show status of SNMP on localhost
    • show snmp community {SNMP Community}
    • show snmp mib ifmib
      • show snmp mib ifmib <ENTER>
        Show SNMP interfaces MIB information
      • show snmp mib ifmib ifAlias
        • show snmp mib ifmib ifAlias <ENTER>
          Show SNMP ifAlias for all interfaces
        • show snmp mib ifmib ifAlias {interface} <ENTER>
          (Show SNMP ifAlias for specified interfaces)
      • show snmp mib ifmib ifDescr
        • show snmp mib ifmib ifDescr <ENTER>
          Show SNMP ifDescr for all interfaces
        • show snmp mib ifmib ifDescr {interface} <ENTER>
          (Show SNMP ifDescr for specified interfaces)
      • show snmp mib ifmib ifIndex
        • show snmp mib ifmib ifIndex <ENTER>
          Show SNMP ifIndex for all interfaces
        • show snmp mib ifmib ifIndex {interface} <ENTER>
          (Show SNMP ifIndex for specified interfaces)
    • show snmp v3
      • show snmp v3 <ENTER>
        Show status of SNMP v3 on localhost
      • show snmp v3 certificates <ENTER>
        Show TSM certificates
      • show snmp v3 group <ENTER>
        Show the list of configured groups
      • show snmp v3 trap-target <ENTER>
        Show the list of configured targets
      • show snmp v3 user <ENTER>
        Show the list of configured users
      • show snmp v3 view <ENTER>
        Show the list of configured views


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show snmp

show system

  • show system
    Show system information
    • show system boot-messages
      • show system boot-messages <ENTER>
        Show most recent kernel boot messages
      • show system boot-messages all <ENTER>
        Show all kernel boot messages
    • show system commit
      • show system commit <ENTER>
        Show commit revisions log
      • show system commit diff {diff} <ENTER>
        show commit revision diff
      • show system commit file {file}
        • show system commit file {file} <ENTER>
          show commit revision file
        • show system commit file {file} compare
          • show system commit file {file} compare <ENTER>
            compare config file revisions
          • show system commit file {file} compare commands <ENTER>
            compare config file revisions
    • show system connections
      • show system connections <ENTER>
        Show active network connections on the system
      • show system connections tcp
        • show system connections tcp <ENTER>
          show TCP connection information
        • show system connections tcp all <ENTER>
          show all TCP connections
        • show system connections tcp numeric <ENTER>
          show TCP connection without resolving names
      • show system connections udp
        • show system connections udp <ENTER>
          show UDP socket information
        • show system connections udp numeric <ENTER>
          show UDP socket information without resolving names
    • show system image
      • show system image <ENTER>
        Show installed Vyatta images
      • show system image storage <ENTER>
        Show disk space utilization of system images
    • show system kernel-messages <ENTER>
      Show messages in kernel ring buffer
    • show system login users
      Show user accounts
      • show system login users <ENTER>
        Show user account information
      • show system login users all <ENTER>
        Show information about all accounts
      • show system login users locked <ENTER>
        Show information about locked accounts
      • show system login users other <ENTER>
        Show information about non-Vyatta accounts
      • show system login users vyatta <ENTER>
        Show information about vyatta accounts
    • show system memory
      • show system memory <ENTER>
        Display system memory usage
      • show system memory cache <ENTER>
        Show kernel cache information
      • show system memory detail <ENTER>
        Report detailed system memory usage
      • show system memory quagga <ENTER>
        Show Quagga memory usage
    • show system processes
      • show system processes <ENTER>
        Show system processes
      • show system processes extensive <ENTER>
        Show extensive process info
      • show system processes summary <ENTER>
        Show summary of system processes
      • show system processes tree <ENTER>
        Show process tree
    • show system routing-daemons <ENTER>
      Show Quagga routing daemons
    • show system storage <ENTER>
      Show filesystem usage
    • show system uptime <ENTER>
      Show how long the system has been up


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show system

show table

  • show table <ENTER>
    Show routing table


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show table

show tech-support

  • show tech-support
    Show consolidated tech-support report
    • show tech-support <ENTER>
      Show consolidated tech-support report
    • show tech-support brief
      • show tech-support brief <ENTER>
        Show brief tech-support report
      • show tech-support brief save
        • show tech-support brief save <ENTER>
          Save brief tech-support report
        • show tech-support brief save {URL} <ENTER>
          Save compressed brief tech-support report to specified path/file
      • show tech-support brief save-uncompressed
        • show tech-support brief save-uncompressed <ENTER>
          Save uncompressed brief tech-support report
        • show tech-support brief save-uncompressed {URL} <ENTER>
          Save uncompressed brief tech-support report to specified path/file
    • show tech-support save
      • show tech-support save <ENTER>
        Save consolidated tech-support report
      • show tech-support save {URL} <ENTER>
        Save compressed tech-support report to the specified path/file
    • show tech-support save-uncompressed
      • show tech-support save-uncompressed <ENTER>
        Save consolidated tech-support report uncompressed
      • show tech-support save-uncompressed {URL} <ENTER>
        Save uncompressed tech-support report to specified path/file


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show tech-support

show ubnt

  • show ubnt
    Show UBNT information
    • show ubnt discover
      • show ubnt discover <ENTER>
        Show UBNT discovered devices
      • show ubnt discover detail <ENTER>
        Show UBNT discovered devices detail
    • show ubnt offload <ENTER>
      Show UBNT offload status

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show ubnt

show update

  • show update
    Run an update command
    • show update webproxy blacklists
      • show update webproxy blacklists <ENTER>
        Update the webproxy blacklist database
      • show update webproxy blacklists category {webproxy blacklist category} <ENTER>
        Update a category of the webproxy blacklist database


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show update

show upnp2

  • show upnp2 rules <ENTER>
    UPnP firewall rules and NAT port forwards


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show upnp2

show users

  • show users <ENTER>
    Show user information
    ログイン中のユーザーの情報を表示


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show users


解説

  • ログイン中のユーザーについては、show login user よりも詳細な情報が表示されます。
  • ログインしていないユーザーの情報を表示する場合は、show system login users を用います。

show version

  • show version
    • show version <ENTER>
      Show Vyatta version information
    • show version added <ENTER>
      Show Vyatta version information plus added packages
    • show version all <ENTER>
      Show Vyatta version information plus all packages changes
    • show version deleted <ENTER>
      Show Vyatta version information plus deleted packages
    • show version downgraded <ENTER>
      Show Vyatta version information plus downgraded packages
    • show version quagga <ENTER>
      Show Quagga version information
    • show version upgraded <ENTER>
      Show Vyatta version information plus upgraded packages


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show version

show vpn

  • show vpn
    Show Virtual Private Network (VPN) information
    • show vpn debug
      • show vpn debug <ENTER>
        Show VPN debugging information
      • show vpn debug detail <ENTER>
        Show detailed VPN debugging information
      • show vpn debug peer {PEER}
        • show vpn debug peer {PEER} <ENTER>
          Show debugging information for a peer
        • show vpn debug peer {PEER} tunnel {TUNNEL} <ENTER>
          Show debugging information for a peer's tunnel
    • show vpn ike
      Show Internet Key Exchange (IKE) information
      • show vpn ike rsa-keys <ENTER>
        Show VPN RSA keys
      • show vpn ike sa
        • show vpn ike sa <ENTER>
          Show all currently active IKE Security Associations (SA)
        • show vpn ike sa nat-traversal <ENTER>
          Show all currently active IKE Security Associations (SA) that are using NAT Traversal
        • show vpn ike sa peer {PEER} <ENTER>
          Show all currently active IKE Security Associations (SA) for a peer
      • show vpn ike secrets <ENTER>
        Show all the pre-shared key secrets
      • show vpn ike status <ENTER>
        Show summary of IKE process information
    • show vpn ipsec
      • show vpn ipsec policy <ENTER>
        Show the in-kernel crypto policies
      • show vpn ipsec sa
        • show vpn ipsec sa <ENTER>
          Show all active IPsec Security Associations (SA)
        • show vpn ipsec sa detail
          • show vpn ipsec sa detail <ENTER>
            Show details for all active IPsec Security Associations (SA)
          • show vpn ipsec sa detail peer {PEER}
            • show vpn ipsec sa detail peer {PEER} <ENTER>
              Show all active IPsec Security Associations (SA) for a peer
            • show vpn ipsec sa detail peer {PEER} tunnel {TUNNEL} <ENTER>
              Show the active IPsec Security Association (SA) for a peer's tunnel
        • show vpn ipsec sa nat-traversal <ENTER>
          Show all active IPsec Security Associations (SA) that are using NAT Traversal
        • show vpn ipsec sa peer {PEER}
          • show vpn ipsec sa peer {PEER} <ENTER>
            Show all active IPsec Security Associations (SA) for a peer
          • show vpn ipsec sa peer {PEER} tunnel {TUNNEL} <ENTER>
            Show the active IPsec Security Association (SA) for a peer's tunnel
        • show vpn ipsec sa statistics
          • show vpn ipsec sa statistics <ENTER>
            Show statistics of all active tunnels that have IPsec Security Associations (SA)
          • show vpn ipsec sa statistics peer {PEER}
            • show vpn ipsec sa statistics peer {PEER} <ENTER>
              Show stats for all active IPsec Security Associations (SA) for a peer
            • show vpn ipsec sa statistics peer {PEER} tunnel {TUNNEL} <ENTER>
              Show stats for the active IPsec Security Association (SA) for a peer's tunnel
      • show vpn ipsec state <ENTER>
        Show the in-kernel crypto state
      • show vpn ipsec status <ENTER>
        Show status of IPsec process
    • show vpn remote-access <ENTER>
      Show active remote access Virtual Private Network (VPN) sessions


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show vpn

show vrrp

  • show vrrp
    • show vrrp <ENTER>
      Show Virtual Router Redundancy Protocol (VRRP) information
      • show vrrp interface {interface}
        • show vrrp interface {interface} <ENTER>
          Show VRRP information for specified interface
        • show vrrp interface {interface} group {GROUP} <ENTER>
          Show VRRP information for specified interface and group
      • show vrrp summary <ENTER>
        Show summary of VRRP information


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show vrrp

show webproxy

  • show webproxy
    Show webproxy information
    • show webproxy blacklist
      • show webproxy blacklist categories <ENTER>
        Show webproxy blacklist categories
      • show webproxy blacklist domains
        • show webproxy blacklist domains <ENTER>
          Show webproxy blacklist domains
        • show webproxy blacklist domains {★DOMAINS★} <ENTER>
          ★★★
      • show webproxy blacklist log
        • show webproxy blacklist log <ENTER>
          Show contents of webproxy blacklist log
        • show webproxy blacklist log summary <ENTER>
          Show summary of webproxy blacklist log
      • show webproxy blacklist search {★SEARCH★} <ENTER>
        Show webproxy blacklist search
      • show webproxy blacklist urls <ENTER>
        Show webproxy blacklist urls
    • show webproxy log <ENTER>
      Show contents of webproxy access log
    • show webproxy update-log <ENTER>
      Show update log for url-filter database


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show webproxy

show zebra

  • show zebra <ENTER>
    Show information for zebra route daemon


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show zebra

関連項目

「http://edge-os.net/w/index.php?title=コマンド_＞_show_(operational)&oldid=617」から取得