コマンド ＞ show (operational)

このページの概要

当ページでは、Operational モード show コマンドの使い方をご紹介します。

コマンドの実行例は、ページ下部の関連項目からアクセスして下さい。

show コマンドの使い方

index

• show
  • show arp

    Show Address Resolution Protocol (ARP) information

  • show bridge

    Show bridging information

  • show configuration

    Show running configuration

  • show conntrack

    Show conntrack entries in the conntrack table

  • show date

    Show system date and time

  • show debugging

    Show route protocol debugging flags

  • show dhcp

    Show Dynamic Host Configuration Protocol (DHCP) information

  • show dhcpv6

    Show status related to DHCPv6

  • show dhcpv6-pd

    Show status related to DHCPv6 Prefix Delegation

  • show disk

    Show status of disk device

  • show dns

    Show Domain Name Server (DNS) information

  • show firewall

    Show firewall information

  • show flow-accounting

    Show flow accounting statistics

  • show hardware

    Show system hardware details

  • show history

    show command history

  • show host

    Show host information

  • show incoming

    Show ethernet input-policy information

  • show interfaces

    Show network interface information

  • show ip

    Show IPv4 routing information

  • show ipv6

    Show IPv6 routing information

  • show lldp

    Show lldp

  • show load-balance

    Show load-balance

  • show log

    Show contents of current master log file

  • show login

    Show current login credentials

  • show nat

    Show Network Address Translation (NAT) information

  • show ntp

    Show peer status of network time daemon

  • show openvpn

    Show OpenVPN information

  • show pppoe-server

    Show active PPPoE server sessions

  • show queueing

    Show ethernet queueing information

  • show reboot

    Show scheduled reboot

  • show route-map

    Show route-map information

  • show shutdown

    Show scheduled shutdown

  • show snmp

    Show status of SNMP on localhost

  • show system

    Show system information

  • show table

    Show routing table

  • show tech-support

    Show consolidated tech-support report

  • show ubnt

    Show UBNT information

  • show update

    Run an update command

  • show upnp2

    show UPnp

  • show users

    Show user information

  • show version

    Show Vyatta version information

  • show vpn

    Show Virtual Private Network (VPN) information

  • show vrrp

    Show Virtual Router Redundancy Protocol (VRRP) information

  • show webproxy

    Show webproxy information

  • show zebra

    Show information for zebra route daemon

show arp

• show arp

  Show Address Resolution Protocol (ARP) information

  • show arp <ENTER>

    Show Address Resolution Protocol (ARP) information

  • show arp {interface} <ENTER>

    Show Address Resolution Protocol (ARP) for a specific interface

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show arp

show bridge

• show bridge
  • show bridge <ENTER>

    Show bridging information

  • show bridge {★BRIDGE★}
    • show bridge {★BRIDGE★} <ENTER>

      ★★★

    • show bridge {★BRIDGE★} macs <ENTER>

      Show bridge Media Access Control (MAC) address table

    • show bridge {★BRIDGE★} spanning-tree <ENTER>

      Show bridge spanning tree information

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show bridge

show configuration

• show configuration
  • show configuration <ENTER>

    Show running configuration

  • show configuration all <ENTER>

    Show running configuration (including default values)

  • show configuration commands <ENTER>

    Show running configuration as set commands

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show configuration

show conntrack

• show conntrack

  Show conntrack entries in the conntrack table

  • show conntrack ignore <ENTER>

    Show Conntrack ignore rules and counters

  • show conntrack table

    Show conntrack entries for table

    • show conntrack table ipv4
      • show conntrack table ipv4 <ENTER>

        Show Conntrack entries for IPv4 protocol

      • show conntrack table ipv4 source {IPv4-address(:port)}
        • show conntrack table ipv4 source {IPv4-address(:port)} <ENTER>

          Show Conntrack entries for the source IP

        • show conntrack table ipv4 source {IPv4-address(:port)} destination {IPv4-address(:port)} <ENTER>

          Show Conntrack entries for the destination IP

    • show conntrack table ipv6
      • show conntrack table ipv6 <ENTER>

        Show Conntrack entries for IPv6 protocol

      • show conntrack table ipv6 source {IPv6-address(:port)}
        • show conntrack table ipv6 source {IPv6-address(:port)} <ENTER>

          Show Conntrack entries for the source IP

        • show conntrack table ipv6 source {IPv6-address(:port)} destination {IPv6-address(:port)} <ENTER>

          Show Conntrack entries for the destination IP

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show conntrack

show date

• show date
  • show date <ENTER>

    Show system date and time

    • show date utc <ENTER>

      Show system date and time as Coordinated Universal Time

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show date

show debugging

• show debugging

  Show route protocol debugging flags

  • show debugging bgp <ENTER>

    Show Border Gateway Protocol (BGP) debugging flags

  • show debugging ospf <ENTER>

    Show Open Shortest Path First (OSPF) protocol debugging flags

  • show debugging ospfv3 <ENTER>

    Show IPv6 Open Shortest Path First (OSPFv3) protocol debugging flags

  • show debugging rip <ENTER>

    Show Routing Information Protocol (RIP) debugging flags

  • show debugging ripng <ENTER>

    Show RIPNG protocol debugging flags

  • show debugging zebra <ENTER>

    Show zebra debugging flags

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show debugging

show dhcp

• show dhcp

  Show Dynamic Host Configuration Protocol (DHCP) information

  • show dhcp client leases
    • show dhcp client leases <ENTER>

      Show DHCP client leases

    • show dhcp client leases interface {interface} <ENTER>

      Show DHCP client information for interface

  • show dhcp leases
    • show dhcp leases <ENTER>

      Show current DHCP leases

    • show dhcp leases expired <ENTER>

      Show expired DHCP leases

    • show dhcp leases pool {DHCP-name}
      • show dhcp leases pool {DHCP-name} <ENTER>

        Show current DHCP leases for a specific pool

      • show dhcp leases pool {DHCP-name} expired <ENTER>

        Show expired DHCP leases for a specific pool

  • show dhcp statistics
    • show dhcp statistics <ENTER>

      Show current DHCP statistics

    • show dhcp statistics pool {DHCP-name} <ENTER>

      Show current DHCP statistics for a specific pool

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dhcp

解説

show dhcp client leases のみ、DHCP クライアント としての EdgeOS の情報、それ以外は DHCP サーバー としての EdgeOS の情報になります。

show dhcp client leases により、CATV 等の回線で、WAN側 DHCP で割り当てられた DNS の情報を確認することができます。詳細は、コマンド実行例 をご覧下さい。

show dhcpv6

• show dhcpv6

  Show status related to DHCPv6

  • show dhcpv6 client leases <ENTER>

    Display DHCPv6 client leases

  • show dhcpv6 relay-agent status <ENTER>

    Show status of DHCPv6 Relay Agent

  • show dhcpv6 server

    Show DHCPv6 server information

    • show dhcpv6 server leases <ENTER>

      Show DHCPv6 Server Leases

    • show dhcpv6 server status <ENTER>

      Show DHCPv6 Server Status

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dhcpv6

show dhcpv6-pd

• show dhcpv6-pd

  Show status related to DHCPv6 Prefix Delegation

  • show dhcpv6-pd duid <ENTER>

    Show DHCPv6-PD DUID

  • show dhcpv6-pd log <ENTER>

    Show DHCPv6-PD log file

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dhcpv6-pd

show disk

• show disk {disk} format <ENTER>

  Show disk drive formatting

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show disk

show dns

• show dns

  Show Domain Name Server (DNS) information

  • show dns dynamic status <ENTER>

    Show Dynamic DNS status

  • show dns forwarding

    Show DNS forwarding information

    • show dns forwarding nameservers <ENTER>

      Show DNS forwarding nameservers information

    • show dns forwarding statistics <ENTER>

      Show DNS forwarding statistics

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dns

show firewall

• show firewall
  • show firewall <ENTER>

    Show firewall information

  • show firewall group
    • show firewall group <ENTER>

      Show firewall/nat groups

    • show firewall group {firewall group name} <ENTER>

      Show firewall/nat group

  • show firewall ipv6-modify
    • show firewall ipv6-modify <ENTER>

      Show IPv6 firewall modify chains

    • show firewall ipv6-modify statistics <ENTER>

      Show firewall counter information

    • show firewall ipv6-modify {★firewall ipv6-modify★}
      • show firewall ipv6-modify {★firewall ipv6-modify★} <ENTER>

        ★★★

      • show firewall ipv6-modify {★firewall ipv6-modify★} rule {★firewall ipv6-modify rule★} <ENTER>

        Show summary of IPv6 firewall modify rules

      • show firewall ipv6-modify {★firewall ipv6-modify★} statistics <ENTER>

        Show IPv6 firewall modify counter information

  • show firewall ipv6-name
    • show firewall ipv6-name <ENTER>

      Show IPv6 firewall chains

    • show firewall ipv6-name statistics <ENTER>

      Show firewall counter information

    • show firewall ipv6-name {IPv6 ファイアウォール}
      • show firewall ipv6-name {IPv6 ファイアウォール} <ENTER>

        ★★★

      • show firewall ipv6-name {IPv6 ファイアウォール} rule {★IPv6 ファイアウォール ルール★} <ENTER>

        Show summary of IPv6 firewall rules

      • show firewall ipv6-name {IPv6 ファイアウォール} statistics <ENTER>

        Show IPv6 firewall counter information

  • show firewall modify
    • show firewall modify <ENTER>

      Show IPv4 firewall modify chains

    • show firewall modify statistics <ENTER>

      Show firewall counter information

    • show firewall modify {★firewall modify★}
      • show firewall modify {★firewall modify★} <ENTER>

        ★★★

      • show firewall modify {★firewall modify★} rule {★firewall modify rule★} <ENTER>

        Show summary of IPv4 firewall modify rules

      • show firewall modify {★firewall modify★} statistics <ENTER>

        Show IPv4 firewall modify counter information

  • show firewall name
    • show firewall name <ENTER>

      Show IPv4 firewall chains

    • show firewall name statistics <ENTER>

      Show firewall counter information

    • show firewall name {IPv4 ファイアウォール}
      • show firewall name {IPv4 ファイアウォール} <ENTER>

        Show rules for given IPv4 firewall chain

      • show firewall name {IPv4 ファイアウォール} rule {IPv4 ファイアウォール ルール} <ENTER>

        Show summary of IPv4 firewall rules

      • show firewall name {IPv4 ファイアウォール} statistics <ENTER>

        Show IPv4 firewall counter information

  • show firewall statistics <ENTER>

    Show firewall counter information

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show firewall

show flow-accounting

• show flow-accounting
• show flow-accounting
  • show flow-accounting <ENTER>

    Show flow accounting statistics

  • show flow-accounting egress
    • show flow-accounting egress <ENTER>

      Show flow accounting statistics

    • show flow-accounting egress interface {interface}
      • show flow-accounting egress interface {interface} <ENTER>

        Show flow accounting statistics for specified interface

      • show flow-accounting egress interface {interface} host {x.x.x.x} <ENTER>

        Show flow accounting statistics for specified interface/host

      • show flow-accounting egress interface {interface} port {0-65536} <ENTER>

        Show flow accounting statistics for specified interface/port

      • show flow-accounting egress interface {interface} top {0-N} <ENTER>

        Show flow accounting statistics for top N

  • show flow-accounting interface {interface}
    • show flow-accounting interface {interface} <ENTER>

      Show flow accounting statistics for specified interface

    • show flow-accounting interface {interface} host {x.x.x.x} <ENTER>

      Show flow accounting statistics for specified interface/host

    • show flow-accounting interface {interface} port {0-65536} <ENTER>

      Show flow accounting statistics for specified interface/port

    • show flow-accounting interface {interface} top {0-N} <ENTER>

      Show flow accounting statistics for top N

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show flow-accounting

show hardware

• show hardware

  Show system hardware details

  • show hardware cpu
    • show hardware cpu <ENTER>

      Show CPU info

    • show hardware cpu detail <ENTER>

      Show system CPU details

    • show hardware cpu summary <ENTER>

      Show CPU's on system

  • show hardware mem <ENTER>

    Show system RAM details

  • show hardware temperature <ENTER>

    Show hardware temperature

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show hardware

show history

• show history

  show command history

show host

• show host

  Show host information

show incoming

• show incoming

  Show ethernet input-policy information

show interfaces

• show interfaces

  Show network interface information

show ip

• show ip

  Show IPv4 routing information

show ipv6

• show ipv6

  Show IPv6 routing information

show lldp

• show lldp

  Show lldp

show load-balance

• show load-balance

  Show load-balance

show log

• show log

  Show contents of current master log file

show login

• show login

  Show current login credentials

show nat

• show nat

  Show Network Address Translation (NAT) information

  • show nat rules <ENTER>

    Show configured NAT rule set

  • show nat statistics <ENTER>

    Show statistics for configured NAT rules

  • show nat translations
    • show nat translations <ENTER>

      Show active NAT translations

    • show nat translations destination
      • show nat translations destination <ENTER>

        Show active NAT destination translations

      • show nat translations destination address {x.x.x.x} <ENTER>

        Show active NAT destination translations for an IP address

      • show nat translations destination detail <ENTER>

        Show active NAT destination translations detail

      • show nat translations destination monitor
        • show nat translations destination monitor <ENTER>

          Show active NAT destination translations events

        • show nat translations destination monitor detail <ENTER>

          Show active NAT destination translations events detail

    • show nat translations detail <ENTER>

      Show active NAT translations detail

    • show nat translations monitor
      • show nat translations monitor <ENTER>

        Show active NAT translations events

      • show nat translations monitor detail <ENTER>

        Show active NAT translations events verbose

    • show nat translations source
      • show nat translations source <ENTER>

        Show active NAT source translations

      • show nat translations source address {x.x.x.x} <ENTER>

        Show active NAT source translations for an IP address

      • show nat translations source detail <ENTER>

        Show active NAT source translations detail

      • show nat translations source monitor
        • show nat translations source monitor <ENTER>

          Show active NAT source translations events

        • show nat translations source monitor detail <ENTER>

          Show active NAT source translations events

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show nat

show ntp

• show ntp
  • show ntp <ENTER>

    Show peer status of network time daemon

  • show ntp {ntp server hostname|ntp server IP address} <ENTER>

    Show date and time of specified NTP server

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show ntp

show openvpn

• show openvpn status

  Show OpenVPN information

  • show openvpn status client <ENTER>

    Show tunnel status for OpenVPN client

  • show openvpn status server <ENTER>

    Show tunnel status for OpenVPN server

  • show openvpn status site-to-site <ENTER>

    Show tunnel status for OpenVPN site-to-site

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show openvpn

show pppoe-server

• show pppoe-server <ENTER>

  Show active PPPoE server sessions

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show pppoe-server

show queueing

• show queueing
  • show queueing <ENTER>

    Show ethernet queueing information

  • show queueing adsl
    • show queueing adsl <ENTER>

      Show adsl queueing information

    • show queueing adsl {★adsl★} <ENTER>

      ★★★

  • show queueing bonding
    • show queueing bonding <ENTER>

      Show bonding queueing information

    • show queueing bonding {★bonding★}
      • show queueing bonding {★bonding★} <ENTER>

        ★★★

      • show queueing bonding {★bonding★} vif
        • show queueing bonding {★bonding★} vif <ENTER>

          Show specified virtual network interface (vif) information

        • show queueing bonding {★bonding★} vif {★vif★} <ENTER>

          ★★★

  • show queueing ethernet
    • show queueing ethernet <ENTER>

      Show ethernet queueing information

    • show queueing ethernet {interface / ethernet}
      • show queueing ethernet {interface / ethernet} <ENTER>

        Show specified ethernet interface information

      • show queueing ethernet {interface / ethernet} vif
        • show queueing ethernet {interface / ethernet} vif <ENTER>

          Show specified virtual network interface (vif) information

        • show queueing ethernet {interface / ethernet} vif {★vif★} <ENTER>

          ★★★

  • show queueing input
    • show queueing input <ENTER>

      Show input queueing information

    • show queueing input {★input★} <ENTER>

      ★★★

  • show queueing pppoe
    • show queueing pppoe <ENTER>

      Show pppoe interface queueing information

    • show queueing pppoe {★pppoe★}
      • show queueing pppoe {★pppoe★} <ENTER>

        ★★★

      • show queueing pppoe {★pppoe★} vif
        • show queueing pppoe {★pppoe★} vif <ENTER>

          Show specified virtual network interface (vif) information

        • show queueing pppoe {★pppoe★} vif {★vif★} <ENTER>

          ★★★

  • show queueing pseudo-ethernet <ENTER>

    Show tunnel queueing information

  • show queueing serial
    • show queueing serial <ENTER>

      Show serial queueing information

    • show queueing serial {★serial★} <ENTER>

      ★★★

  • show queueing tunnel <ENTER>

    Show tunnel queueing information

  • show queueing vti <ENTER>

    Show vti queueing information

  • show queueing wireless
    • show queueing wireless <ENTER>

      Show wireless queueing information

    • show queueing wireless {★wireless★}
      • show queueing wireless {★wireless★} <ENTER>

        ★★★

      • show queueing wireless {★wireless★} vif
        • show queueing wireless {★wireless★} vif <ENTER>

          Show specified virtual network interface (vif) information

        • show queueing wireless {★wireless★} vif {★vif★} <ENTER>

          ★★★

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show queueing

show reboot

• show reboot <ENTER>

  Show scheduled reboot

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show reboot

show route-map

• show route-map
  • show route-map <ENTER>

    Show route-map information

  • show route-map {WORD} <ENTER>

    Show specified route-map information

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show route-map

show shutdown

• show shutdown <ENTER>

  Show scheduled shutdown

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show shutdown

show snmp

• show snmp
  • show snmp <ENTER>

    Show status of SNMP on localhost

  • show snmp community {SNMP Community}
    • show snmp community {SNMP Community} <ENTER>

      Show status of specified SNMP community

    • show snmp community {SNMP Community} host {hostname|x.x.x.x} <ENTER>

      Show status of SNMP on remote host

  • show snmp mib ifmib
    • show snmp mib ifmib <ENTER>

      Show SNMP interfaces MIB information

    • show snmp mib ifmib ifAlias
      • show snmp mib ifmib ifAlias <ENTER>

        Show SNMP ifAlias for all interfaces

      • show snmp mib ifmib ifAlias {interface} <ENTER>

        (Show SNMP ifAlias for specified interfaces)

    • show snmp mib ifmib ifDescr
      • show snmp mib ifmib ifDescr <ENTER>

        Show SNMP ifDescr for all interfaces

      • show snmp mib ifmib ifDescr {interface} <ENTER>

        (Show SNMP ifDescr for specified interfaces)

    • show snmp mib ifmib ifIndex
      • show snmp mib ifmib ifIndex <ENTER>

        Show SNMP ifIndex for all interfaces

      • show snmp mib ifmib ifIndex {interface} <ENTER>

        (Show SNMP ifIndex for specified interfaces)

  • show snmp v3
    • show snmp v3 <ENTER>

      Show status of SNMP v3 on localhost

    • show snmp v3 certificates <ENTER>

      Show TSM certificates

    • show snmp v3 group <ENTER>

      Show the list of configured groups

    • show snmp v3 trap-target <ENTER>

      Show the list of configured targets

    • show snmp v3 user <ENTER>

      Show the list of configured users

    • show snmp v3 view <ENTER>

      Show the list of configured views

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show snmp

show system

• show system

  Show system information

  • show system boot-messages
    • show system boot-messages <ENTER>

      Show most recent kernel boot messages

    • show system boot-messages all <ENTER>

      Show all kernel boot messages

  • show system commit
    • show system commit <ENTER>

      Show commit revisions log

    • show system commit diff {diff} <ENTER>

      show commit revision diff

    • show system commit file {file}
      • show system commit file {file} <ENTER>

        show commit revision file

      • show system commit file {file} compare
        • show system commit file {file} compare <ENTER>

          compare config file revisions

        • show system commit file {file} compare commands <ENTER>

          compare config file revisions

  • show system connections
    • show system connections <ENTER>

      Show active network connections on the system

    • show system connections tcp
      • show system connections tcp <ENTER>

        show TCP connection information

      • show system connections tcp all <ENTER>

        show all TCP connections

      • show system connections tcp numeric <ENTER>

        show TCP connection without resolving names

    • show system connections udp
      • show system connections udp <ENTER>

        show UDP socket information

      • show system connections udp numeric <ENTER>

        show UDP socket information without resolving names

  • show system image
    • show system image <ENTER>

      Show installed Vyatta images

    • show system image storage <ENTER>

      Show disk space utilization of system images

  • show system kernel-messages <ENTER>

    Show messages in kernel ring buffer

  • show system login users

    Show user accounts

    • show system login users <ENTER>

      Show user account information

    • show system login users all <ENTER>

      Show information about all accounts

    • show system login users locked <ENTER>

      Show information about locked accounts

    • show system login users other <ENTER>

      Show information about non-Vyatta accounts

    • show system login users vyatta <ENTER>

      Show information about vyatta accounts

  • show system memory
    • show system memory <ENTER>

      Display system memory usage

    • show system memory cache <ENTER>

      Show kernel cache information

    • show system memory detail <ENTER>

      Report detailed system memory usage

    • show system memory quagga <ENTER>

      Show Quagga memory usage

  • show system processes
    • show system processes <ENTER>

      Show system processes

    • show system processes extensive <ENTER>

      Show extensive process info

    • show system processes summary <ENTER>

      Show summary of system processes

    • show system processes tree <ENTER>

      Show process tree

  • show system routing-daemons <ENTER>

    Show Quagga routing daemons

  • show system storage <ENTER>

    Show filesystem usage

  • show system uptime <ENTER>

    Show how long the system has been up

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show system

show table

• show table <ENTER>

  Show routing table

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show table

show tech-support

• show tech-support

  Show consolidated tech-support report

  • show tech-support <ENTER>

    Show consolidated tech-support report

  • show tech-support brief
    • show tech-support brief <ENTER>

      Show brief tech-support report

    • show tech-support brief save
      • show tech-support brief save <ENTER>

        Save brief tech-support report

      • show tech-support brief save {URL} <ENTER>

        Save compressed brief tech-support report to specified path/file

    • show tech-support brief save-uncompressed
      • show tech-support brief save-uncompressed <ENTER>

        Save uncompressed brief tech-support report

      • show tech-support brief save-uncompressed {URL} <ENTER>

        Save uncompressed brief tech-support report to specified path/file

  • show tech-support save
    • show tech-support save <ENTER>

      Save consolidated tech-support report

    • show tech-support save {URL} <ENTER>

      Save compressed tech-support report to the specified path/file

  • show tech-support save-uncompressed
    • show tech-support save-uncompressed <ENTER>

      Save consolidated tech-support report uncompressed

    • show tech-support save-uncompressed {URL} <ENTER>

      Save uncompressed tech-support report to specified path/file

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show tech-support

show ubnt

• show ubnt

  Show UBNT information

  • show ubnt discover
    • show ubnt discover <ENTER>

      Show UBNT discovered devices

    • show ubnt discover detail <ENTER>

      Show UBNT discovered devices detail

  • show ubnt offload <ENTER>

    Show UBNT offload status

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show ubnt

show update

• show update

  Run an update command

  • show update webproxy blacklists
    • show update webproxy blacklists <ENTER>

      Update the webproxy blacklist database

    • show update webproxy blacklists category {webproxy blacklist category} <ENTER>

      Update a category of the webproxy blacklist database

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show update

show upnp2

• show upnp2 rules <ENTER>

  UPnP firewall rules and NAT port forwards

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show upnp2

show users

• show users <ENTER>

  Show user information

  ログイン中のユーザーの情報を表示

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show users

解説

• ログイン中のユーザーについては、show login user よりも詳細な情報が表示されます。
• ログインしていないユーザーの情報を表示する場合は、show system login users を用います。

show version

• show version
  • show version <ENTER>

    Show Vyatta version information

  • show version added <ENTER>

    Show Vyatta version information plus added packages

  • show version all <ENTER>

    Show Vyatta version information plus all packages changes

  • show version deleted <ENTER>

    Show Vyatta version information plus deleted packages

  • show version downgraded <ENTER>

    Show Vyatta version information plus downgraded packages

  • show version quagga <ENTER>

    Show Quagga version information

  • show version upgraded <ENTER>

    Show Vyatta version information plus upgraded packages

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show version

show vpn

• show vpn

  Show Virtual Private Network (VPN) information

  • show vpn debug
    • show vpn debug <ENTER>

      Show VPN debugging information

    • show vpn debug detail <ENTER>

      Show detailed VPN debugging information

    • show vpn debug peer {PEER}
      • show vpn debug peer {PEER} <ENTER>

        Show debugging information for a peer

      • show vpn debug peer {PEER} tunnel {TUNNEL} <ENTER>

        Show debugging information for a peer's tunnel

  • show vpn ike

    Show Internet Key Exchange (IKE) information

    • show vpn ike rsa-keys <ENTER>

      Show VPN RSA keys

    • show vpn ike sa
      • show vpn ike sa <ENTER>

        Show all currently active IKE Security Associations (SA)

      • show vpn ike sa nat-traversal <ENTER>

        Show all currently active IKE Security Associations (SA) that are using NAT Traversal

      • show vpn ike sa peer {PEER} <ENTER>

        Show all currently active IKE Security Associations (SA) for a peer

    • show vpn ike secrets <ENTER>

      Show all the pre-shared key secrets

    • show vpn ike status <ENTER>

      Show summary of IKE process information

  • show vpn ipsec
    • show vpn ipsec policy <ENTER>

      Show the in-kernel crypto policies

    • show vpn ipsec sa
      • show vpn ipsec sa <ENTER>

        Show all active IPsec Security Associations (SA)

      • show vpn ipsec sa detail
        • show vpn ipsec sa detail <ENTER>

          Show details for all active IPsec Security Associations (SA)

        • show vpn ipsec sa detail peer {PEER}
          • show vpn ipsec sa detail peer {PEER} <ENTER>

            Show all active IPsec Security Associations (SA) for a peer

          • show vpn ipsec sa detail peer {PEER} tunnel {TUNNEL} <ENTER>

            Show the active IPsec Security Association (SA) for a peer's tunnel

      • show vpn ipsec sa nat-traversal <ENTER>

        Show all active IPsec Security Associations (SA) that are using NAT Traversal

      • show vpn ipsec sa peer {PEER}
        • show vpn ipsec sa peer {PEER} <ENTER>

          Show all active IPsec Security Associations (SA) for a peer

        • show vpn ipsec sa peer {PEER} tunnel {TUNNEL} <ENTER>

          Show the active IPsec Security Association (SA) for a peer's tunnel

      • show vpn ipsec sa statistics
        • show vpn ipsec sa statistics <ENTER>

          Show statistics of all active tunnels that have IPsec Security Associations (SA)

        • show vpn ipsec sa statistics peer {PEER}
          • show vpn ipsec sa statistics peer {PEER} <ENTER>

            Show stats for all active IPsec Security Associations (SA) for a peer

          • show vpn ipsec sa statistics peer {PEER} tunnel {TUNNEL} <ENTER>

            Show stats for the active IPsec Security Association (SA) for a peer's tunnel

    • show vpn ipsec state <ENTER>

      Show the in-kernel crypto state

    • show vpn ipsec status <ENTER>

      Show status of IPsec process

  • show vpn remote-access <ENTER>

    Show active remote access Virtual Private Network (VPN) sessions

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show vpn

show vrrp

• show vrrp
  • show vrrp <ENTER>

    Show Virtual Router Redundancy Protocol (VRRP) information

    • show vrrp interface {interface}
      • show vrrp interface {interface} <ENTER>

        Show VRRP information for specified interface

      • show vrrp interface {interface} group {GROUP} <ENTER>

        Show VRRP information for specified interface and group

    • show vrrp summary <ENTER>

      Show summary of VRRP information

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show vrrp

show webproxy

• show webproxy

  Show webproxy information

  • show webproxy blacklist
    • show webproxy blacklist categories <ENTER>

      Show webproxy blacklist categories

    • show webproxy blacklist domains
      • show webproxy blacklist domains <ENTER>

        Show webproxy blacklist domains

      • show webproxy blacklist domains {★DOMAINS★} <ENTER>

        ★★★

    • show webproxy blacklist log
      • show webproxy blacklist log <ENTER>

        Show contents of webproxy blacklist log

      • show webproxy blacklist log summary <ENTER>

        Show summary of webproxy blacklist log

    • show webproxy blacklist search {★SEARCH★} <ENTER>

      Show webproxy blacklist search

    • show webproxy blacklist urls <ENTER>

      Show webproxy blacklist urls

  • show webproxy log <ENTER>

    Show contents of webproxy access log

  • show webproxy update-log <ENTER>

    Show update log for url-filter database

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show webproxy

show zebra

• show zebra <ENTER>

  Show information for zebra route daemon

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show zebra

関連項目

• コマンド実行例 ＞ show (operational)