2016/02/23 EdgeMAX シリーズのファームウェア v1.8.0 がリリースされました。
詳細はこちら をご覧下さい。

「コマンド ＞ show (operational)」の版間の差分

提供：EdgeOS 日本語Wiki [非公式]
ナビゲーションに移動 検索に移動
239行目: 239行目:


=== show disk ===
=== show disk ===
* show '''disk'''
* show '''disk [[パラメーター ＞ disk|{disk}]] format''' <ENTER>
*: Show disk drive formatting
<!--
*: Show status of disk device
*: Show status of disk device
-->


コマンド実行例 : [[コマンド実行例 ＞ show (operational) ＞ show disk]]


=== show dns ===
=== show dns ===

2015年9月28日 (月) 16:48時点における版

このページの概要

当ページでは、Operational モード show コマンドの使い方をご紹介します。

コマンドの実行例は、ページ下部の関連項目からアクセスして下さい。

show コマンドの使い方

index

show arp

  • show arp
    Show Address Resolution Protocol (ARP) information
    • show arp <ENTER>
      Show Address Resolution Protocol (ARP) information
    • show arp {interface} <ENTER>
      Show Address Resolution Protocol (ARP) for a specific interface


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show arp

show bridge

  • show bridge
    • show bridge <ENTER>
      Show bridging information
    • show bridge {★BRIDGE★}
      • show bridge {★BRIDGE★} <ENTER>
        ★★★
      • show bridge {★BRIDGE★} macs <ENTER>
        Show bridge Media Access Control (MAC) address table
      • show bridge {★BRIDGE★} spanning-tree <ENTER>
        Show bridge spanning tree information


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show bridge

show configuration

  • show configuration
    • show configuration <ENTER>
      Show running configuration
    • show configuration all <ENTER>
      Show running configuration (including default values)
    • show configuration commands <ENTER>
      Show running configuration as set commands

show conntrack

  • show conntrack
    Show conntrack entries in the conntrack table
    • show conntrack ignore <ENTER>
      Show Conntrack ignore rules and counters
    • show conntrack table
      Show conntrack entries for table

show date

  • show date
    • show date <ENTER>
      Show system date and time
      • show date utc <ENTER>
        Show system date and time as Coordinated Universal Time


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show date

show debugging

  • show debugging
    Show route protocol debugging flags
    • show debugging bgp <ENTER>
      Show Border Gateway Protocol (BGP) debugging flags
    • show debugging ospf <ENTER>
      Show Open Shortest Path First (OSPF) protocol debugging flags
    • show debugging ospfv3 <ENTER>
      Show IPv6 Open Shortest Path First (OSPFv3) protocol debugging flags
    • show debugging rip <ENTER>
      Show Routing Information Protocol (RIP) debugging flags
    • show debugging ripng <ENTER>
      Show RIPNG protocol debugging flags
    • show debugging zebra <ENTER>
      Show zebra debugging flags


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show debugging

show dhcp

  • show dhcp
    Show Dynamic Host Configuration Protocol (DHCP) information
    • show dhcp client leases
      • show dhcp client leases <ENTER>
        Show DHCP client leases
      • show dhcp client leases interface {interface} <ENTER>
        Show DHCP client information for interface
    • show dhcp leases
      • show dhcp leases <ENTER>
        Show current DHCP leases
      • show dhcp leases expired <ENTER>
        Show expired DHCP leases
      • show dhcp leases pool {DHCP-name}
        • show dhcp leases pool {DHCP-name} <ENTER>
          Show current DHCP leases for a specific pool
        • show dhcp leases pool {DHCP-name} expired <ENTER>
          Show expired DHCP leases for a specific pool
    • show dhcp statistics
      • show dhcp statistics <ENTER>
        Show current DHCP statistics
      • show dhcp statistics pool {DHCP-name} <ENTER>
        Show current DHCP statistics for a specific pool

show dhcpv6

  • show dhcpv6
    Show status related to DHCPv6
    • show dhcpv6 client leases <ENTER>
      Display DHCPv6 client leases
    • show dhcpv6 relay-agent status <ENTER>
      Show status of DHCPv6 Relay Agent
    • show dhcpv6 server
      Show DHCPv6 server information
      • show dhcpv6 server leases <ENTER>
        Show DHCPv6 Server Leases
      • show dhcpv6 server status <ENTER>
        Show DHCPv6 Server Status


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dhcpv6

show dhcpv6-pd

  • show dhcpv6-pd
    Show status related to DHCPv6 Prefix Delegation
    • show dhcpv6-pd duid <ENTER>
      Show DHCPv6-PD DUID
    • show dhcpv6-pd log <ENTER>
      Show DHCPv6-PD log file


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show dhcpv6-pd

show disk

  • show disk {disk} format <ENTER>
    Show disk drive formatting


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show disk

show dns

  • show dns
    Show Domain Name Server (DNS) information
    • show dns dynamic status <ENTER>
      Show Dynamic DNS status
    • show dns forwarding
      Show DNS forwarding information
      • show dns forwarding nameservers <ENTER>
        Show DNS forwarding nameservers information
      • show dns forwarding statistics <ENTER>
        Show DNS forwarding statistics

show firewall

  • show firewall
    Show firewall information


show flow-accounting

  • show flow-accounting
    Show flow accounting statistics


show hardware

  • show hardware
    Show system hardware details
    • show hardware cpu
      • show hardware cpu <ENTER>
        Show CPU info
      • show hardware cpu detail <ENTER>
        Show system CPU details
      • show hardware cpu summary <ENTER>
        Show CPU's on system
    • show hardware mem <ENTER>
      Show system RAM details
    • show hardware temperature <ENTER>
      Show hardware temperature


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show hardware

show history

  • show history
    show command history


show host

  • show host
    Show host information


show incoming

  • show incoming
    Show ethernet input-policy information


show interfaces

  • show interfaces
    Show network interface information


show ip

  • show ip
    Show IPv4 routing information


show ipv6

  • show ipv6
    Show IPv6 routing information


show lldp

  • show lldp
    Show lldp


show load-balance

  • show load-balance
    Show load-balance


show log

  • show log
    Show contents of current master log file


show login

  • show login
    Show current login credentials


show nat

  • show nat
    Show Network Address Translation (NAT) information


show ntp

  • show ntp
    Show peer status of network time daemon


show openvpn

  • show openvpn
    Show OpenVPN information


show pppoe-server

  • show pppoe-server <ENTER>
    Show active PPPoE server sessions


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show pppoe-server

show queueing

  • show queueing
    Show ethernet queueing information


show reboot

  • show reboot <ENTER>
    Show scheduled reboot


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show reboot

show route-map

  • show route-map
    Show route-map information


show shutdown

  • show shutdown <ENTER>
    Show scheduled shutdown


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show shutdown

show snmp

  • show snmp
    Show status of SNMP on localhost


show system

  • show system
    Show system information
    • show system boot-messages
      • show system boot-messages <ENTER>
        Show most recent kernel boot messages
      • show system boot-messages all <ENTER>
        Show all kernel boot messages
    • show system commit
      • show system commit <ENTER>
        Show commit revisions log
      • show system commit diff {diff} <ENTER>
        show commit revision diff
      • show system commit file {file}
        • show system commit file {file} <ENTER>
          show commit revision file
        • show system commit file {file} compare
          • show system commit file {file} compare <ENTER>
            compare config file revisions
          • show system commit file {file} compare commands <ENTER>
            compare config file revisions
    • show system connections
      • show system connections <ENTER>
        Show active network connections on the system
      • show system connections tcp
        • show system connections tcp <ENTER>
          show TCP connection information
        • show system connections tcp all <ENTER>
          show all TCP connections
        • show system connections tcp numeric <ENTER>
          show TCP connection without resolving names
      • show system connections udp
        • show system connections udp <ENTER>
          show UDP socket information
        • show system connections udp numeric <ENTER>
          show UDP socket information without resolving names
    • show system image
      • show system image <ENTER>
        Show installed Vyatta images
      • show system image storage <ENTER>
        Show disk space utilization of system images
    • show system kernel-messages <ENTER>
      Show messages in kernel ring buffer
    • show system login users
      Show user accounts
      • show system login users <ENTER>
        Show user account information
      • show system login users all <ENTER>
        Show information about all accounts
      • show system login users locked <ENTER>
        Show information about locked accounts
      • show system login users other <ENTER>
        Show information about non-Vyatta accounts
      • show system login users vyatta <ENTER>
        Show information about vyatta accounts
    • show system memory
      • show system memory <ENTER>
        Display system memory usage
      • show system memory cache <ENTER>
        Show kernel cache information
      • show system memory detail <ENTER>
        Report detailed system memory usage
      • show system memory quagga <ENTER>
        Show Quagga memory usage
    • show system processes
      • show system processes <ENTER>
        Show system processes
      • show system processes extensive <ENTER>
        Show extensive process info
      • show system processes summary <ENTER>
        Show summary of system processes
      • show system processes tree <ENTER>
        Show process tree
    • show system routing-daemons <ENTER>
      Show Quagga routing daemons
    • show system storage <ENTER>
      Show filesystem usage
    • show system uptime <ENTER>
      Show how long the system has been up


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show system

show table

  • show table <ENTER>
    Show routing table


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show table

show tech-support

  • show tech-support
    Show consolidated tech-support report
    • show tech-support <ENTER>
      Show consolidated tech-support report
    • show tech-support brief
      • show tech-support brief <ENTER>
        Show brief tech-support report
      • show tech-support brief save
        • show tech-support brief save <ENTER>
          Save brief tech-support report
        • show tech-support brief save {URL} <ENTER>
          Save compressed brief tech-support report to specified path/file
      • show tech-support brief save-uncompressed
        • show tech-support brief save-uncompressed <ENTER>
          Save uncompressed brief tech-support report
        • show tech-support brief save-uncompressed {URL} <ENTER>
          Save uncompressed brief tech-support report to specified path/file
    • show tech-support save
      • show tech-support save <ENTER>
        Save consolidated tech-support report
      • show tech-support save {URL} <ENTER>
        Save compressed tech-support report to the specified path/file
    • show tech-support save-uncompressed
      • show tech-support save-uncompressed <ENTER>
        Save consolidated tech-support report uncompressed
      • show tech-support save-uncompressed {URL} <ENTER>
        Save uncompressed tech-support report to specified path/file


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show tech-support

show ubnt

  • show ubnt
    Show UBNT information
    • show ubnt discover
      • show ubnt discover <ENTER>
        Show UBNT discovered devices
      • show ubnt discover detail <ENTER>
        Show UBNT discovered devices detail
    • show ubnt offload <ENTER>
      Show UBNT offload status

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show ubnt

show update

  • show update
    Run an update command
    • show update webproxy blacklists
      • show update webproxy blacklists <ENTER>
        Update the webproxy blacklist database
      • show update webproxy blacklists category {webproxy blacklist category} <ENTER>
        Update a category of the webproxy blacklist database


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show update

show upnp2

  • show upnp2 rules <ENTER>
    UPnP firewall rules and NAT port forwards


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show upnp2

show users

  • show users <ENTER>
    Show user information
    ログイン中のユーザーの情報を表示
※ ログインしていないユーザーの情報を表示する場合は、show system login users になります。

コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show users

show version

  • show version
    • show version <ENTER>
      Show Vyatta version information
    • show version added <ENTER>
      Show Vyatta version information plus added packages
    • show version all <ENTER>
      Show Vyatta version information plus all packages changes
    • show version deleted <ENTER>
      Show Vyatta version information plus deleted packages
    • show version downgraded <ENTER>
      Show Vyatta version information plus downgraded packages
    • show version quagga <ENTER>
      Show Quagga version information
    • show version upgraded <ENTER>
      Show Vyatta version information plus upgraded packages


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show version

show vpn

  • show vpn
    Show Virtual Private Network (VPN) information


show vrrp

  • show vrrp
    Show Virtual Router Redundancy Protocol (VRRP) information


show webproxy

  • show webproxy
    Show webproxy information


show zebra

  • show zebra <ENTER>
    Show information for zebra route daemon


コマンド実行例 : コマンド実行例 ＞ show (operational) ＞ show zebra

関連項目

「http://edge-os.net/w/index.php?title=コマンド_＞_show_(operational)&oldid=261」から取得