コマンド実行例 ＞ show (operational) ＞ show ntp

このページの概要

当ページは、Operational (操作) モード時の show ntp コマンドについて、実行例をご紹介します。

show ntp 実行例

show ntp

USER@EDGEOS:~$ show ntp <ENTER>

     remote           local      st poll reach  delay   offset    disp
=======================================================================
=157.999.999.173 555.555.555.555  2 1024  377 0.01631  0.004546 0.14629
=106.999.999.114 555.555.555.555  3 1024  377 0.00972  0.003864 0.16071
*116.999.999.97  555.555.555.555  2 1024  377 0.01425  0.000090 0.14078
=129.999.999.251 555.555.555.555  2 1024  377 0.01797  0.001864 0.14786

show ntp {ntp server hostname|ntp server IP address}

USER@EDGEOS:~$ show ntp 0.ubnt.pool.ntp.org <ENTER>

server 106.187.50.84, stratum 2, offset 0.001980, delay 0.03525
server 157.7.64.173, stratum 2, offset 0.003442, delay 0.03639
server 49.212.186.27, stratum 2, offset 0.005133, delay 0.04282
server 106.186.17.174, stratum 2, offset 0.003798, delay 0.03844
29 Sep 01:53:34 ntpdate[26892]: adjust time server 106.187.50.84 offset 0.001980 sec

USER@EDGEOS:~$ show ntp 106.187.50.84 <ENTER>

server 106.187.50.84, stratum 2, offset 0.024334, delay 0.08223
29 Sep 02:06:22 ntpdate[27118]: adjust time server 106.187.50.84 offset 0.024334 sec

USER@EDGEOS:~$ show ntp ntp1.jst.mfeed.ad.jp <ENTER>

server 210.173.160.27, stratum 2, offset 0.004968, delay 0.03589
29 Sep 01:55:49 ntpdate[26958]: adjust time server 210.173.160.27 offset 0.004968 sec

関連項目

• コマンド ＞ show (operational)#show_ntp