2016/02/23 EdgeMAX シリーズのファームウェア v1.8.0 がリリースされました。
詳細はこちら をご覧下さい。

「コマンド ＞ debug (operational)」の版間の差分

提供：EdgeOS 日本語Wiki [非公式]
ナビゲーションに移動 検索に移動
(ページの作成:「== このページの概要 == 当ページでは、Operational モード debug コマンドの使い方をご紹介します。 ※ 当ページは一部編集途中で...」)
 
 
(同じ利用者による、間の3版が非表示)
2行目: 2行目:
当ページでは、Operational モード debug コマンドの使い方をご紹介します。
当ページでは、Operational モード debug コマンドの使い方をご紹介します。


※ 当ページは一部編集途中です...。
== 解説 ==
debug コマンドで On にしたルーティング情報のデバッグモードは、[[コマンド ＞ no (operational)|no debug コマンド]]で Off にすることができます。


== debug コマンドの使い方 ==
== debug コマンドの使い方 ==
=== index (debug) ===
* '''debug'''
* '''debug'''
*: Enable debugging of specified routing protocol
*: Enable debugging of specified routing protocol
** debug '''bgp'''
** [[#debug_bgp|debug '''bgp''']]
**: Enable Border Gateway Protocol (BGP) debugging
**: Enable Border Gateway Protocol (BGP) debugging
** debug '''ospf'''
** [[#debug_ospf|debug '''ospf''']]
**: Enable Open Shortest Path First (OSPF) protocol debugging
**: Enable Open Shortest Path First (OSPF) protocol debugging
** debug '''ospfv3'''
** [[#debug_ospfv3|debug '''ospfv3''']]
**: Enable IPv6 Open Shortest Path First (OSPFv3) protocol debugging
**: Enable IPv6 Open Shortest Path First (OSPFv3) protocol debugging
** debug '''rip'''
** [[#debug_rip|debug '''rip''']]
**: Enable Routing Information Protocol (RIP) debugging
**: Enable Routing Information Protocol (RIP) debugging
** debug '''ripng'''
** [[#debug_ripng|debug '''ripng''']]
**: Enable RIPNG protocol debugging
**: Enable RIPNG protocol debugging
** debug '''zebra'''
** [[#debug_zebra|debug '''zebra''']]
**: Enable zebra debugging
**: Enable zebra debugging


47行目: 50行目:
Enable Open Shortest Path First (OSPF) protocol debugging
Enable Open Shortest Path First (OSPF) protocol debugging


==== index (debug ospf) ====
* [[#debug_ospf_event|debug ospf '''event''']] <ENTER>
*: Enable OSPF event debugging
* [[#debug_ospf_ism|debug ospf '''ism''']]
*: Enable OSPF ism debugging
* [[#debug_ospf_lsa|debug ospf '''lsa''']] <ENTER>
*:Enable OSPF lsa debugging
* [[#debug_ospf_nsm|debug ospf '''nsm''']]
*: Enable OSPF nsm debugging
* [[#debug_ospf_nssa|debug ospf '''nssa''']] <ENTER>
*: Enable OSPF nssa debugging
* [[#debug_ospf_packet|debug ospf '''packet''']]
*: Enable OSPF packet debugging
* [[#debug_ospf_zebra|debug ospf '''zebra''']] <ENTER>
*: Enable OSPF zebra debugging
==== debug ospf '''event''' ====
* debug ospf '''event''' <ENTER>
* debug ospf '''event''' <ENTER>
*: Enable OSPF event debugging
*: Enable OSPF event debugging
==== debug ospf '''ism''' ====
* debug ospf '''ism'''
* debug ospf '''ism'''
** debug ospf ism <ENTER>
** debug ospf ism <ENTER>
58行目: 80行目:
** debug ospf ism '''timers''' <ENTER>
** debug ospf ism '''timers''' <ENTER>
**: Enable OSPF ism timers debugging
**: Enable OSPF ism timers debugging
* debug ospf '''lsa''' <ENTER>
 
==== debug ospf '''lsa''' ====
* debug ospf '''lsa'''
** debug ospf lsa <ENTER>
** debug ospf lsa <ENTER>
**:Enable OSPF lsa debugging
**:Enable OSPF lsa debugging
69行目: 93行目:
** debug ospf lsa '''refresh''' <ENTER>
** debug ospf lsa '''refresh''' <ENTER>
**: Enable OSPF lsa refresh debugging
**: Enable OSPF lsa refresh debugging
==== debug ospf '''nsm''' ====
* debug ospf '''nsm'''
* debug ospf '''nsm'''
** debug ospf nsm <ENTER>
** debug ospf nsm <ENTER>
78行目: 104行目:
** debug ospf nsm '''timers''' <ENTER>
** debug ospf nsm '''timers''' <ENTER>
**: Enable OSPF nsm timers debugging
**: Enable OSPF nsm timers debugging
==== debug ospf '''nssa''' ====
* debug ospf '''nssa''' <ENTER>
* debug ospf '''nssa''' <ENTER>
*: Enable OSPF nssa debugging
*: Enable OSPF nssa debugging
==== debug ospf '''packet''' ====
* debug ospf '''packet'''
* debug ospf '''packet'''
*: Enable OSPF packet debugging
*: Enable OSPF packet debugging
177行目: 208行目:
**** debug ospf packet ls-update send '''detail''' <ENTER>
**** debug ospf packet ls-update send '''detail''' <ENTER>
****: Enable detailed OSPF send ls-update packet debugging
****: Enable detailed OSPF send ls-update packet debugging
==== debug ospf '''zebra''' ====
* debug ospf '''zebra'''
* debug ospf '''zebra'''
** debug ospf zebra <ENTER>
** debug ospf zebra <ENTER>
185行目: 218行目:
**: Enable OSPF zebra redistribute debugging
**: Enable OSPF zebra redistribute debugging


== debug opfv3 ==
=== debug opfv3 ===
Enable IPv6 Open Shortest Path First (OSPFv3) protocol debugging
Enable IPv6 Open Shortest Path First (OSPFv3) protocol debugging


* debug ospfv3 '''xxxxxx'''


* debug ospfv3 '''abr''' <ENTER>
*: Enable OSPFv3 ABR debugging
* debug ospfv3 '''asbr''' <ENTER>
*: Enable OSPFv3 ASBR debugging
* debug ospfv3 '''border-routers'''
** debug ospfv3 border-routers <ENTER>
**: Enable OSPFv3 border router debugging
** debug ospfv3 border-routers '''area-id [[パラメーター ＞ Area ID|{Area-ID}]]''' <ENTER>
**: Border router debugging sub-parameters
** debug ospfv3 border-routers '''router-id [[パラメーター ＞ Router ID|{Router-ID}]]''' <ENTER>
**: Border router debugging sub-parameters
* debug ospfv3 '''flooding''' <ENTER>
*: Enable OSPFv3 flooding debugging
* debug ospfv3 '''interface''' <ENTER>
*: Enable OSPFv3 Interface debugging
* debug ospfv3 '''lsa <something>''' <ENTER>
*: Enable OSPFv3 Link State Advertisments debugging
* debug ospfv3 '''message'''
** debug ospfv3 message <ENTER>
**: Enable OSPFv3 message debugging
** debug ospfv3 message '''all'''
*** debug ospfv3 message all <ENTER>
***: Message debugging sub-parameters
*** debug ospfv3 message all '''recv''' <ENTER>
***: Neighbor debugging sub-sub-parameters
*** debug ospfv3 message all '''send''' <ENTER>
***: Neighbor debugging sub-sub-parameters
** debug ospfv3 message '''dbdesc'''
*** debug ospfv3 message dbdesc <ENTER>
***: Message debugging sub-parameters
*** debug ospfv3 message dbdesc '''recv''' <ENTER>
***: Neighbor debugging sub-sub-parameters
*** debug ospfv3 message dbdesc '''send''' <ENTER>
***: Neighbor debugging sub-sub-parameters
** debug ospfv3 message '''hello'''
*** debug ospfv3 message hello <ENTER>
***: Message debugging sub-parameters
*** debug ospfv3 message hello '''recv''' <ENTER>
***: Neighbor debugging sub-sub-parameters
*** debug ospfv3 message hello '''send''' <ENTER>
***: Neighbor debugging sub-sub-parameters
** debug ospfv3 message '''lsack'''
*** debug ospfv3 message lsack <ENTER>
***: Message debugging sub-parameters
*** debug ospfv3 message lsack '''recv''' <ENTER>
***: Neighbor debugging sub-sub-parameters
*** debug ospfv3 message lsack '''send''' <ENTER>
***: Neighbor debugging sub-sub-parameters
** debug ospfv3 message '''lsreq'''
*** debug ospfv3 message lsreq <ENTER>
***: Message debugging sub-parameters
*** debug ospfv3 message lsreq '''recv''' <ENTER>
***: Neighbor debugging sub-sub-parameters
*** debug ospfv3 message lsreq '''send''' <ENTER>
***: Neighbor debugging sub-sub-parameters
** debug ospfv3 message '''lsupdate'''
*** debug ospfv3 message lsupdate <ENTER>
***: Message debugging sub-parameters
*** debug ospfv3 message lsupdate '''recv''' <ENTER>
***: Neighbor debugging sub-sub-parameters
*** debug ospfv3 message lsupdate '''send''' <ENTER>
***: Neighbor debugging sub-sub-parameters
** debug ospfv3 message '''unknown'''
*** debug ospfv3 message unknown <ENTER>
***: Message debugging sub-parameters
*** debug ospfv3 message unknown '''recv''' <ENTER>
***: Neighbor debugging sub-sub-parameters
*** debug ospfv3 message unknown '''send''' <ENTER>
***: Neighbor debugging sub-sub-parameters
* debug ospfv3 '''neighbor'''
** debug ospfv3 neighbor <ENTER>
**: Enable OSPFv3 Neighbor debugging
** debug ospfv3 neighbor '''event''' <ENTER>
**: Neighbor debugging sub-parameters
** debug ospfv3 neighbor '''state''' <ENTER>
**: Neighbor debugging sub-parameters
* debug ospfv3 '''route'''
*: Enable OSPFv3 route table calculation debugging
** debug ospfv3 route '''inter-area''' <ENTER>
**: Route table debugging sub-parameters
** debug ospfv3 route '''intra-area''' <ENTER>
**: Route table debugging sub-parameters
** debug ospfv3 route '''table''' <ENTER>
**: Route table debugging sub-parameters
* debug ospfv3 '''spf'''
*: Enable OSPFv3 SPF calculation debugging
** debug ospfv3 spf '''database''' <ENTER>
**: SPF debugging sub-parameters
** debug ospfv3 spf '''process''' <ENTER>
**: SPF debugging sub-parameters
** debug ospfv3 spf '''time''' <ENTER>
**: SPF debugging sub-parameters
* debug ospfv3 '''zebra'''
** debug ospfv3 zebra <ENTER>
**: Enable OSPFv3 connection to zebra debugging
** debug ospfv3 '''recv'''<ENTER>
**: Zebra debugging sub-parameters
** debug ospfv3 '''send'''<ENTER>
**: Zebra debugging sub-parameters


== debug rip ==
=== debug rip ===
Enable Routing Information Protocol (RIP) debugging
Enable Routing Information Protocol (RIP) debugging


* debug rip '''events''' <ENTER>
* debug rip '''events''' <ENTER>
208行目: 341行目:
*: Enable RIP zebra debugging
*: Enable RIP zebra debugging


== debug ripng ==
=== debug ripng ===
Enable RIPNG protocol debugging
Enable RIPNG protocol debugging


* debug ripng '''xxxxx'''
 
* debug ripng '''events''' <ENTER>
* debug ripng '''events''' <ENTER>
*: Enable RIPNG events debugging
*: Enable RIPNG events debugging
227行目: 360行目:




== debug zebra ==
=== debug zebra ===
Enable zebra debugging
Enable zebra debugging


* debug zebra '''events''' <ENTER>
* debug zebra '''events''' <ENTER>
252行目: 386行目:
** debug zebra rib '''queue''' <ENTER>
** debug zebra rib '''queue''' <ENTER>
**: Enable zebra rib queue debugging
**: Enable zebra rib queue debugging


== 関連項目 ==
== 関連項目 ==
* [[コマンド ＞ no (operational)|コマンド ＞ no (operational)]]
* [[パラメーター ＞ Area ID|パラメーター ＞ Area ID]]
* [[パラメーター ＞ Router ID|パラメーター ＞ Router ID]]


== 外部サイト ==
== 外部サイト ==




Enable debugging of specified routing protocol
[[Category:コマンド]]

2015年9月26日 (土) 16:54時点における最新版

このページの概要

当ページでは、Operational モード debug コマンドの使い方をご紹介します。

解説

debug コマンドで On にしたルーティング情報のデバッグモードは、no debug コマンドで Off にすることができます。

debug コマンドの使い方

index (debug)

  • debug
    Enable debugging of specified routing protocol
    • debug bgp
      Enable Border Gateway Protocol (BGP) debugging
    • debug ospf
      Enable Open Shortest Path First (OSPF) protocol debugging
    • debug ospfv3
      Enable IPv6 Open Shortest Path First (OSPFv3) protocol debugging
    • debug rip
      Enable Routing Information Protocol (RIP) debugging
    • debug ripng
      Enable RIPNG protocol debugging
    • debug zebra
      Enable zebra debugging


debug bgp

Enable Border Gateway Protocol (BGP) debugging

  • debug bgp <ENTER>
    Enable Border Gateway Protocol (BGP) debugging
    • debug bgp events <ENTER>
      Enable BGP events debugging
    • debug bgp filters <ENTER>
      Enable BGP filters debugging
    • debug bgp fsm <ENTER>
      Enable BGP fsm debugging
    • debug bgp keepalives <ENTER>
      Enable BGP keepalives debugging
    • debug bgp updates
      • debug bgp updates <ENTER>
        Enable BGP updates debugging
      • debug bgp updates in <ENTER>
        Enable BGP input updates debugging
      • debug bgp updates out <ENTER>
        Enable BGP output updates debugging
    • debug bgp zebra <ENTER>
      Enable BGP zebra debugging

debug ospf

Enable Open Shortest Path First (OSPF) protocol debugging

index (debug ospf)

debug ospf event

  • debug ospf event <ENTER>
    Enable OSPF event debugging

debug ospf ism

  • debug ospf ism
    • debug ospf ism <ENTER>
      Enable OSPF ism debugging
    • debug ospf ism events <ENTER>
      Enable OSPF ism events debugging
    • debug ospf ism status <ENTER>
      Enable OSPF ism status debugging
    • debug ospf ism timers <ENTER>
      Enable OSPF ism timers debugging

debug ospf lsa

  • debug ospf lsa
    • debug ospf lsa <ENTER>
      Enable OSPF lsa debugging
    • debug ospf lsa flooding <ENTER>
      Enable OSPF lsa flooding debugging
    • debug ospf lsa generate <ENTER>
      Enable OSPF lsa generate debugging
    • debug ospf lsa install <ENTER>
      Enable OSPF lsa install debugging
    • debug ospf lsa refresh <ENTER>
      Enable OSPF lsa refresh debugging

debug ospf nsm

  • debug ospf nsm
    • debug ospf nsm <ENTER>
      Enable OSPF nsm debugging
    • debug ospf nsm events <ENTER>
      Enable OSPF nsm events debugging
    • debug ospf nsm status <ENTER>
      Enable OSPF nsm status debugging
    • debug ospf nsm timers <ENTER>
      Enable OSPF nsm timers debugging


debug ospf nssa

  • debug ospf nssa <ENTER>
    Enable OSPF nssa debugging

debug ospf packet

  • debug ospf packet
    Enable OSPF packet debugging
    • debug ospf packet all
      • debug ospf packet all <ENTER>
        Enable OSPF all packet debugging
      • debug ospf packet all detail <ENETER>
        Enable detailed OSPF all packet debugging
      • debug ospf packet all recv
        • debug ospf packet all recv <ENTER>
          Enable OSPF recv all packet debugging
        • debug ospf packet all recv detail <ENTER>
          Enable detailed OSPF recv all packet debugging
      • debug ospf packet all send
        • debug ospf packet all send <ENTER>
          Enable OSPF send all packet debugging
        • debug ospf packet all send detail <ENTER>
          Enable detailed OSPF send all packet debugging
    • debug ospf packet dd
      • debug ospf packet dd <ENTER>
        Enable OSPF dd packet debugging
      • debug ospf packet dd detail
        • debug ospf packet dd detail <ENTER>
          Enable detailed OSPF dd packet debugging
      • debug ospf packet dd recv
        • debug ospf packet dd recv <ENTER>
          Enable OSPF recv dd packet debugging
        • debug ospf packet dd recv detail <ENTER>
          Enable detailed OSPF recv dd packet debugging
      • debug ospf packet dd send
        • debug ospf packet dd send <ENTER>
          Enable OSPF send dd packet debugging
        • debug ospf packet dd send detail <ENTER>
          Enable detailed OSPF send dd packet debugging
    • debug ospf packet hello
      • debug ospf packet hello <ENTER>
        Enable OSPF hello packet debugging
      • debug ospf packet hello detail
        • debug ospf packet hello detail <ENTER>
          Enable detailed OSPF hello packet debugging
      • debug ospf packet hello recv
        • debug ospf packet hello recv <ENTER>
          Enable OSPF recv hello packet debugging
        • debug ospf packet hello recv detail <ENTER>
          Enable detailed OSPF recv hello packet debugging
      • debug ospf packet hello send
        • debug ospf packet hello send <ENTER>
          Enable OSPF send hello packet debugging
        • debug ospf packet hello send detail <ENTER>
          Enable detailed OSPF send hello packet debugging
    • debug ospf packet ls-ack
      • debug ospf packet ls-ack <ENTER>
        Enable OSPF ls-ack packet debugging
      • debug ospf packet ls-ack detail
        • debug ospf packet ls-ack detail <ENTER>
          Enable detailed OSPF ls-ack packet debugging
      • debug ospf packet ls-ack recv
        • debug ospf packet ls-ack recv <ENTER>
          Enable OSPF recv ls-ack packet debugging
        • debug ospf packet ls-ack recv detail <ENTER>
          Enable detailed OSPF recv ls-ack packet debugging
      • debug ospf packet ls-ack send
        • debug ospf packet ls-ack send <ENTER>
          Enable OSPF send ls-ack packet debugging
        • debug ospf packet ls-ack send detail <ENTER>
          Enable detailed OSPF send ls-ack packet debugging
    • debug ospf packet ls-request
      • debug ospf packet ls-request <ENTER>
        Enable OSPF ls-request packet debugging
      • debug ospf packet ls-request detail
        • debug ospf packet ls-request detail <ENTER>
          Enable detailed OSPF ls-request packet debugging
      • debug ospf packet ls-request recv
        • debug ospf packet ls-request recv <ENTER>
          Enable OSPF recv ls-request packet debugging
        • debug ospf packet ls-request recv detail <ENTER>
          Enable detailed OSPF recv ls-request packet debugging
      • debug ospf packet ls-request send
        • debug ospf packet ls-request send <ENTER>
          Enable OSPF send ls-request packet debugging
        • debug ospf packet ls-request send detail <ENTER>
          Enable detailed OSPF send ls-request packet debugging
    • debug ospf packet ls-update
      • debug ospf packet ls-update <ENTER>
        Enable OSPF ls-update packet debugging
      • debug ospf packet ls-update detail
        • debug ospf packet ls-update detail <ENTER>
          Enable detailed OSPF ls-update packet debugging
      • debug ospf packet ls-update recv
        • debug ospf packet ls-update recv <ENTER>
          Enable OSPF recv ls-update packet debugging
        • debug ospf packet ls-update recv detail <ENTER>
          Enable detailed OSPF recv ls-update packet debugging
      • debug ospf packet ls-update send
        • debug ospf packet ls-update send <ENTER>
          Enable OSPF send ls-update packet debugging
        • debug ospf packet ls-update send detail <ENTER>
          Enable detailed OSPF send ls-update packet debugging

debug ospf zebra

  • debug ospf zebra
    • debug ospf zebra <ENTER>
      Enable OSPF zebra debugging
    • debug ospf zebra interface <ENTER>
      Enable OSPF zebra interface debugging
    • debug ospf zebra redistribute <ENTER>
      Enable OSPF zebra redistribute debugging

debug opfv3

Enable IPv6 Open Shortest Path First (OSPFv3) protocol debugging


  • debug ospfv3 abr <ENTER>
    Enable OSPFv3 ABR debugging
  • debug ospfv3 asbr <ENTER>
    Enable OSPFv3 ASBR debugging
  • debug ospfv3 border-routers
    • debug ospfv3 border-routers <ENTER>
      Enable OSPFv3 border router debugging
    • debug ospfv3 border-routers area-id {Area-ID} <ENTER>
      Border router debugging sub-parameters
    • debug ospfv3 border-routers router-id {Router-ID} <ENTER>
      Border router debugging sub-parameters
  • debug ospfv3 flooding <ENTER>
    Enable OSPFv3 flooding debugging
  • debug ospfv3 interface <ENTER>
    Enable OSPFv3 Interface debugging
  • debug ospfv3 lsa <something> <ENTER>
    Enable OSPFv3 Link State Advertisments debugging
  • debug ospfv3 message
    • debug ospfv3 message <ENTER>
      Enable OSPFv3 message debugging
    • debug ospfv3 message all
      • debug ospfv3 message all <ENTER>
        Message debugging sub-parameters
      • debug ospfv3 message all recv <ENTER>
        Neighbor debugging sub-sub-parameters
      • debug ospfv3 message all send <ENTER>
        Neighbor debugging sub-sub-parameters
    • debug ospfv3 message dbdesc
      • debug ospfv3 message dbdesc <ENTER>
        Message debugging sub-parameters
      • debug ospfv3 message dbdesc recv <ENTER>
        Neighbor debugging sub-sub-parameters
      • debug ospfv3 message dbdesc send <ENTER>
        Neighbor debugging sub-sub-parameters
    • debug ospfv3 message hello
      • debug ospfv3 message hello <ENTER>
        Message debugging sub-parameters
      • debug ospfv3 message hello recv <ENTER>
        Neighbor debugging sub-sub-parameters
      • debug ospfv3 message hello send <ENTER>
        Neighbor debugging sub-sub-parameters
    • debug ospfv3 message lsack
      • debug ospfv3 message lsack <ENTER>
        Message debugging sub-parameters
      • debug ospfv3 message lsack recv <ENTER>
        Neighbor debugging sub-sub-parameters
      • debug ospfv3 message lsack send <ENTER>
        Neighbor debugging sub-sub-parameters
    • debug ospfv3 message lsreq
      • debug ospfv3 message lsreq <ENTER>
        Message debugging sub-parameters
      • debug ospfv3 message lsreq recv <ENTER>
        Neighbor debugging sub-sub-parameters
      • debug ospfv3 message lsreq send <ENTER>
        Neighbor debugging sub-sub-parameters
    • debug ospfv3 message lsupdate
      • debug ospfv3 message lsupdate <ENTER>
        Message debugging sub-parameters
      • debug ospfv3 message lsupdate recv <ENTER>
        Neighbor debugging sub-sub-parameters
      • debug ospfv3 message lsupdate send <ENTER>
        Neighbor debugging sub-sub-parameters
    • debug ospfv3 message unknown
      • debug ospfv3 message unknown <ENTER>
        Message debugging sub-parameters
      • debug ospfv3 message unknown recv <ENTER>
        Neighbor debugging sub-sub-parameters
      • debug ospfv3 message unknown send <ENTER>
        Neighbor debugging sub-sub-parameters
  • debug ospfv3 neighbor
    • debug ospfv3 neighbor <ENTER>
      Enable OSPFv3 Neighbor debugging
    • debug ospfv3 neighbor event <ENTER>
      Neighbor debugging sub-parameters
    • debug ospfv3 neighbor state <ENTER>
      Neighbor debugging sub-parameters
  • debug ospfv3 route
    Enable OSPFv3 route table calculation debugging
    • debug ospfv3 route inter-area <ENTER>
      Route table debugging sub-parameters
    • debug ospfv3 route intra-area <ENTER>
      Route table debugging sub-parameters
    • debug ospfv3 route table <ENTER>
      Route table debugging sub-parameters
  • debug ospfv3 spf
    Enable OSPFv3 SPF calculation debugging
    • debug ospfv3 spf database <ENTER>
      SPF debugging sub-parameters
    • debug ospfv3 spf process <ENTER>
      SPF debugging sub-parameters
    • debug ospfv3 spf time <ENTER>
      SPF debugging sub-parameters
  • debug ospfv3 zebra
    • debug ospfv3 zebra <ENTER>
      Enable OSPFv3 connection to zebra debugging
    • debug ospfv3 recv<ENTER>
      Zebra debugging sub-parameters
    • debug ospfv3 send<ENTER>
      Zebra debugging sub-parameters

debug rip

Enable Routing Information Protocol (RIP) debugging


  • debug rip events <ENTER>
    Enable RIP events debugging
  • debug rip kernel <ENTER>
    Enable RIP kernel debugging
  • debug rip packet
    • debug rip packet <ENTER>
      Enable RIP packet debugging
    • debug rip packet recv <ENTER>
      Enable RIP recv packet debugging
    • debug rip packet send <ENTER>
      Enable RIP send packet debugging
  • debug rip zebra <ENTER>
    Enable RIP zebra debugging

debug ripng

Enable RIPNG protocol debugging


  • debug ripng events <ENTER>
    Enable RIPNG events debugging
  • debug ripng kernel <ENTER>
    Enable RIPNG kernel debugging
  • debug ripng packet
    • debug ripng packet <ENTER>
      Enable RIPNG packet debugging
    • debug ripng packet recv <ENTER>
      Enable RIPNG recv packet debugging
    • debug ripng packet send <ENTER>
      Enable RIPNG send packet debugging
  • debug ripng zebra <ENTER>
    Enable RIPNG zebra debugging


debug zebra

Enable zebra debugging


  • debug zebra events <ENTER>
    Enable zebra events debugging
  • debug zebra kernel <ENTER>
    Enable zebra kernel debugging
  • debug zebra packet
    • debug zebra packet <ENTER>
      Enable zebra packet debugging
    • debug zebra packet recv
      • debug zebra packet recv <ENTER>
        Enable zebra recv packet debugging
      • debug zebra packet recv detail <ENTER>
        Enable detailed zebra recv packet debugging
    • debug zebra packet send
      • debug zebra packet send <ENTER>
        Enable zebra send packet debugging
      • debug zebra packet send detail <ENTER>
        Enable detailed zebra send packet debugging
  • debug zebra rib
    • debug zebra rib <ENTER>
      Enable zebra rib debugging
    • debug zebra rib queue <ENTER>
      Enable zebra rib queue debugging

関連項目

外部サイト

「http://edge-os.net/w/index.php?title=コマンド_＞_debug_(operational)&oldid=133」から取得