コマンド ＞ configure ＞ traffic-policy

このページの概要

当ページでは、Configure モード 設定編集系 コマンドで、traffic-policy を利用する方法をご紹介します。

解説

traffic-policy は、設定要素の一つであり、設定編集系のコマンド と共に用います。

• # 設定編集系コマンド traffic-policy パラメーター
• 例 : # set traffic-policy パラメーター

のように用います。

• 作成した traffic-policy は、インターフェースに適用して初めて有効になります。

  コマンド ＞ configure ＞ interfaces もご覧下さい。

各 policy と設定可能なパケット方向

• limiter : in
• priority-queue : out
• shaper : out

その他判明したものは追記していきます。

traffic-policy のパラメーター

index

• traffic-policy drop-tail

  Drop tail queue (FIFO) policy

• traffic-policy fair-queue

  Fair queuing policy

• traffic-policy limiter

  Traffic input limiting policy

• traffic-policy network-emulator

  Network emulator policy

• traffic-policy priority-queue

  Priority queuing based policy

• traffic-policy random-detect

  Weighted Random Early Detect policy

• traffic-policy rate-control

  Rate limiting policy

• traffic-policy round-robin

  Deficit round robin based policy

• traffic-policy shaper

  Traffic shaping based policy

traffic-policy drop-tail

• set traffic-policy drop-tail {T_POLICY_ENTRY}

  Drop tail queue (FIFO) policy

  • set traffic-policy drop-tail {T_POLICY_ENTRY} description {任意テキスト}

    Description for this queuing policy

  • set traffic-policy drop-tail {T_POLICY_ENTRY} queue-limit {1-4294967295}

    Maximum queue size (packets)

traffic-policy fair-queue

• set traffic-policy fair-queue {T_POLICY_ENTRY}

  Fair queuing policy

  • set traffic-policy fair-queue {T_POLICY_ENTRY} description {任意テキスト}

    Description for this queuing policy

  • set traffic-policy fair-queue {T_POLICY_ENTRY} hash-interval {0-4294967295}

    Hash interval (seconds)

  • set traffic-policy fair-queue {T_POLICY_ENTRY} queue-limit {1-127}

    Maximum queue size (packets)

traffic-policy limiter

• set traffic-policy limiter {T_POLICY_ENTRY}

  Traffic input limiting policy

  • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090}

    Class ID

    • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} bandwidth

      Traffic-limit used for this class [REQUIRED]

      • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} bandwidth {NUMBER}

        Rate in k (1000) bytes per second

      • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} bandwidth {NUMBER} {SUFFIX}

        Rate with scaling suffix (mbit, mbps, ...)

    • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} burst

      Burst size for this class (default: 15kb)

      • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} burst {NUMBER}

        Bytes

      • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} burst {NUMBER} {SUFFIX}

        Bytes with scaling suffix (kb, mb, gb)

    • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} description {任意テキスト}

      Description for this traffic class

    • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY}

      Class matching rule name

      • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} description {任意テキスト}

        Description for this match

      • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ether

        Ethernet header match

        • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ether destination {x.x.x.x}

          Ethernet destination address for this match

        • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ether protocol {ethernet プロトコル 条件式}

          Ethernet protocol for this match

        • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ether source {x.x.x.x}

          Ethernet source address for this match

      • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ip

        Match IP protocol header

        • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ip destination

          Match on destination port or address

          • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ip destination address {x.x.x.x/x}

            IP destination address for this match

          • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ip destination port {IPv4 ポート 条件式}

            TCP (or UDP) destination port for this match

        • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ip dscp {IPv4 DSCP 条件式}

          Match on Differentiated Services Codepoint (DSCP)

        • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ip protocol {IPv4 プロトコル 条件式}

          Match IP protocol name or number

        • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ip source

          Match on source port or address

          • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ip source address {x.x.x.x/x}

            IP source address for this match

          • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ip source port {IPv4 ポート 条件式}

            TCP (or UDP) source port for this match

      • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ipv6

        Match IPV6 header

        • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ipv6 destination

          Match on destination port or address

          • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ipv6 destination address {h:h:h:h:h:h/x}

            IP destination address for this match

          • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ipv6 destination port {IPv6 ポート 条件式}

            TCP (or UDP) destination port for this match

        • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ipv6 dscp {IPv6 DSCP 条件式}

          Match on Differentiated Services Codepoint (DSCP)

        • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ipv6 protocol {IPv6 プロトコル 条件式}

          Match IP protocol name or number

        • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ipv6 source

          Match on source port or address

          • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ipv6 source address {h:h:h:h:h:h/x}

            IP source address for this match

          • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} ipv6 source port {IPv6 ポート 条件式}

            TCP (or UDP) source port for this match

      • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} match {T_POLICY_MATCH_ENTRY} vif {0-4095}

        Virtual Local Area Network (VLAN) ID for this match

    • set traffic-policy limiter {T_POLICY_ENTRY} class {1-4090} priority {0-20}

      Priority value

  • set traffic-policy limiter {T_POLICY_ENTRY} default

    Default policy

    • set traffic-policy limiter {T_POLICY_ENTRY} default bandwidth

      Traffic-limit used for this class [REQUIRED]

      • set traffic-policy limiter {T_POLICY_ENTRY} default bandwidth {NUMBER}

        Rate in k (1000) bytes per second

      • set traffic-policy limiter {T_POLICY_ENTRY} default bandwidth {NUMBER} {SUFFIX}

        Rate with scaling suffix (mbit, mbps, ...)

    • set traffic-policy limiter {T_POLICY_ENTRY} default burst

      Burst size for this class (default: 15kb)

      • set traffic-policy limiter {T_POLICY_ENTRY} default burst {NUMBER}

        Bytes

      • set traffic-policy limiter {T_POLICY_ENTRY} default burst {NUMBER} {SUFFIX}

        Bytes with scaling suffix (kb, mb, gb)

  • set traffic-policy limiter {T_POLICY_ENTRY} description {任意テキスト}

    Description for this queuing policy

traffic-policy network-emulator

• set traffic-policy network-emulator {T_POLICY_ENTRY}

  Network emulator policy

  • set traffic-policy network-emulator {T_POLICY_ENTRY} bandwidth

    Bandwidth limit

    • set traffic-policy network-emulator {T_POLICY_ENTRY} bandwidth {NUMBER}

      Rate in k (1000) bytes per second

    • set traffic-policy network-emulator {T_POLICY_ENTRY} bandwidth {NUMBER} {SUFFIX}

      Rate with scaling suffix (mbit, mbps, ...)

  • set traffic-policy network-emulator {T_POLICY_ENTRY} burst

    Burst size

    • set traffic-policy network-emulator {T_POLICY_ENTRY} burst {NUMBER}

      Bytes

    • set traffic-policy network-emulator {T_POLICY_ENTRY} burst {NUMBER} {SUFFIX}

      Bytes with scaling suffix (kb, mb, gb)

  • set traffic-policy network-emulator {T_POLICY_ENTRY} description {任意テキスト}

    Description for this queuing policy

  • set traffic-policy network-emulator {T_POLICY_ENTRY} network-delay

    Additional network delay

    • set traffic-policy network-emulator {T_POLICY_ENTRY} network-delay {NUMBER}

      Time in milliseconds

    • set traffic-policy network-emulator {T_POLICY_ENTRY} network-delay {NUMBER} {SUFFIX}

      Time with suffix (secs, ms, us)

  • set traffic-policy network-emulator {T_POLICY_ENTRY} packet-corruption {NUMBER}%

    Emulated packet data corruption rate

  • set traffic-policy network-emulator {T_POLICY_ENTRY} packet-loss {NUMBER}%

    Emulated packet loss rate

  • set traffic-policy network-emulator {T_POLICY_ENTRY} packet-reordering {NUMBER}%

    Emulated packet reordering percentage

  • set traffic-policy network-emulator {T_POLICY_ENTRY} queue-limit {1-4294967295}

    Maximum queue size (packets)

traffic-policy priority-queue

• set traffic-policy priority-queue {T_POLICY_ENTRY}

  Priority queuing based policy

  • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7}

    Class handle

    • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} description {任意テキスト}

      Description for this traffic class

    • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY}

      Class matching rule name

      • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} description {任意テキスト}

        Description for this match

      • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ether

        Ethernet header match

        • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ether destination {IPv4/v6 アドレス}

          Ethernet destination address for this match

        • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ether protocol {ethernet プロトコル 条件式}

          Ethernet protocol for this match

        • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ether source {IPv4/v6 アドレス}

          Ethernet source address for this match

      • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} interface {interface}

        Interface name for this match

      • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ip

        Match IP protocol header

        • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ip destination

          Match on destination port or address

          • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ip destination address {x.x.x.x/x}

            IP destination address for this match

          • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ip destination port {IPv4 ポート 条件式}

            TCP (or UDP) destination port for this match

        • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ip dscp {IPv4 DSCP 条件式}

          Match on Differentiated Services Codepoint (DSCP)

        • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ip protocol {IPv4 プロトコル 条件式}

          Match IP protocol name or number

        • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ip source

          Match on source port or address

          • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ip source address {x.x.x.x/x}

            IP source address for this match

          • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ip source port {IPv4 ポート 条件式}

            TCP (or UDP) source port for this match

      • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ipv6

        Match IPV6 header

        • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ipv6 destination

          Match on destination port or address

          • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ipv6 destination address {h:h:h:h:h:h/x}

            IP destination address for this match

          • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ipv6 destination port {IPv6 ポート 条件式}

            TCP (or UDP) destination port for this match

        • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ipv6 dscp {IPv6 DSCP 条件式}

          Match on Differentiated Services Codepoint (DSCP)

        • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ipv6 protocol {IPv6 プロトコル 条件式}

          Match IP protocol name or number

        • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ipv6 source

          Match on source port or address

          • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ipv6 source address {h:h:h:h:h:h/x}

            IP source address for this match

          • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} ipv6 source port {IPv6 ポート 条件式}

            TCP (or UDP) source port for this match

      • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} mark {0-4294967295}

        Match on mark applied by firewall

      • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} match {T_POLICY_MATCH_ENTRY} vif {0-4095}

        Virtual Local Area Network (VLAN) ID for this match

    • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} queue-limit {1-4294967295}

      Maximum queue size (packets)

    • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} queue-type

      Queue type for this class

      • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} queue-type fair-queue

        Stochastic Fair Queue (SFQ)

      • set traffic-policy priority-queue {T_POLICY_ENTRY} class {1-7} queue-type drop-tail

        First-In-First-Out (FIFO)

  • set traffic-policy priority-queue {T_POLICY_ENTRY} default

    Default policy

    • set traffic-policy priority-queue {T_POLICY_ENTRY} default queue-limit {1-4294967295}

      Maximum queue size (packets)

    • set traffic-policy priority-queue {T_POLICY_ENTRY} default queue-type

      Queue type for default traffic

      • set traffic-policy priority-queue {T_POLICY_ENTRY} default queue-type fair-queue

        Stochastic Fair Queue (SFQ)

      • set traffic-policy priority-queue {T_POLICY_ENTRY} default queue-type drop-tail

        First-In-First-Out (FIFO)

  • set traffic-policy priority-queue {T_POLICY_ENTRY} description {任意テキスト}

    Description for this queuing policy

traffic-policy random-detect

• set traffic-policy random-detect {T_POLICY_ENTRY}

  Weighted Random Early Detect policy

  • set traffic-policy random-detect {T_POLICY_ENTRY} bandwidth

    Available bandwidth for this policy

    • set traffic-policy random-detect {T_POLICY_ENTRY} bandwidth auto

      Rate based on interface speed (default)

    • set traffic-policy random-detect {T_POLICY_ENTRY} bandwidth {NUMBER}

      Rate in k (1000) bytes per second

    • set traffic-policy random-detect {T_POLICY_ENTRY} bandwidth {NUMBER} {SUFFIX}

      Rate with scaling suffix (mbit, mbps, ...)

  • set traffic-policy random-detect {T_POLICY_ENTRY} description {任意テキスト}

    Description for queuing policy

  • set traffic-policy random-detect {T_POLICY_ENTRY} precedence {0-7}

    IP precedence

    • set traffic-policy random-detect {T_POLICY_ENTRY} precedence {0-7} average-packet {16-10240}

      Average packet size (bytes)

    • set traffic-policy random-detect {T_POLICY_ENTRY} precedence {0-7} mark-probability {NUMBER}

      Mark probability for this precedence (1/N)

    • set traffic-policy random-detect {T_POLICY_ENTRY} precedence {0-7} maximum-threshold {0-4096}

      Maximum threshold for random detection

    • set traffic-policy random-detect {T_POLICY_ENTRY} precedence {0-7} minimum-threshold {0-4096}

      Minimum threshold for random detection

    • set traffic-policy random-detect {T_POLICY_ENTRY} precedence {0-7} queue-limit {1-4294967295}

      Maximum queue size (packets)

traffic-policy rate-control

• set traffic-policy rate-control {T_POLICY_ENTRY}

  Rate limiting policy

  • set traffic-policy rate-control {T_POLICY_ENTRY} bandwidth

    Bandwidth limit

    • set traffic-policy rate-control {T_POLICY_ENTRY} bandwidth {NUMBER}

      Rate in k (1000) bytes per second

    • set traffic-policy rate-control {T_POLICY_ENTRY} bandwidth {NUMBER} {SUFFIX}

      Rate with scaling suffix (mbit, mbps, ...)

  • set traffic-policy rate-control {T_POLICY_ENTRY} burst

    Burst size

    • set traffic-policy rate-control {T_POLICY_ENTRY} burst {NUMBER}

      Bytes

    • set traffic-policy rate-control {T_POLICY_ENTRY} burst {NUMBER} {SUFFIX}

      Bytes with scaling suffix (kb, mb, gb)

  • set traffic-policy rate-control {T_POLICY_ENTRY} description {任意テキスト}

    Description for this queuing policy

  • set traffic-policy rate-control {T_POLICY_ENTRY} latency

    Maximum latency

    • set traffic-policy rate-control {T_POLICY_ENTRY} latency {NUMBER}

      Time in milliseconds

    • set traffic-policy rate-control {T_POLICY_ENTRY} latency {NUMBER} {SUFFIX}

      Time with suffix (secs, ms, us)

関連項目

• コマンド ＞ configure ＞ 設定要素・設定編集コマンド対応一覧
• コマンド ＞ configure ＞ interfaces

凡例

「★」は、不明であることを表しています。

注意事項

動作の確認は、EdgeRouter X : ER-X にて行っています。 他のモデルでは、一部動作が異なる可能性があります。